Skip to Main Content

insightsarticles

Retirement plan loans: A brief review

09.15.21

Read this if you are a plan sponsor of employee benefit plans.

This article is the ninth in a series to help employee benefit plan fiduciaries better understand their responsibilities and manage the risks of non-compliance with Employee Retirement Income Security Act (ERISA) requirements. You can read the previous articles here

Employee benefit plan loan basics 

If your plan’s adoption agreement is set up to allow loans, participants can borrow against their account balance. Some participants may find this an attractive option as the interest they pay on the loan is returned to their retirement account as opposed to other loans where the interest is paid to the lender. 

Additionally, while interest is charged at the market rate, it may be lower than other options available to the participant, such as a credit card or other unsecured debt. Unlike hardship distributions, there are no restrictions on the circumstances under which a participant may take a loan. A potential downside is that if the borrower defaults on the loan or ends their employment and cannot repay the loan in full, it converts from a loan to a deemed distribution, potentially incurring taxes and penalties.

If a participant decides that an employee benefit plan loan is their best option, they will apply for the loan through your plan administrator. Loans are limited in both size and quantity. Participants may take loans up to 50% of their vested account balance with a maximum loan of $50,000. The provisions of a plan determine how many loans an employee may have at once; however, the combined loan balances cannot exceed 50% of the employee’s vested balance or $50,000. Furthermore, the $50,000 loan maximum must also consider payments made on loans within the previous 12 months.

Repayment of employee benefit plan loans

Repayment of employee benefit plan loans may be done through after tax payroll contributions, making it a relatively easy process for the participant. If a plan sponsor elects to provide this repayment option, they must ensure that repayments are remitted to the plan in a timely manner, just as they must with other employee funded contributions. The term of the loan is typically limited to five years and must be repaid in at least quarterly installments. However, a loan can be extended to as long as thirty years if specified within the plan’s loan policy. If the loan term is for longer than five years, the loan proceeds must be used to purchase a primary residence.

Like any source of debt, there are pros and cons to taking out an employee benefit plan loan, and it remains an important option for participants to understand. The benefits include the ease of applying for such a loan and loan interest that is then added to the participant’s retirement account balance. Potential pitfalls include lost earnings during the loan period and the risk of the loan becoming a deemed distribution if the participant is unable to repay within the allotted time. 

If you would like more information, or have specific questions about your specific situation, please contact our Employee Benefits Audit team.

Related Services

Related Professionals

Principals

BerryDunn experts and consultants

This article is the first in a series to help employee benefit plan fiduciaries better understand their responsibilities and manage the risks of non-compliance with ERISA requirements.

On Labor Day, 1974, President Gerald Ford signed the Employee Retirement Income Security Act, commonly known as ERISA, into law. Prior to ERISA, employee pensions had scant protections under the law, a problem made clear when the Studebaker automobile company closed its South Bend, Indiana production plant in 1963. Upon the plant’s closing, some 4,000 employees—whose average age was 52 and average length of service with the company was 23 years—received approximately 15 cents for each dollar of benefit they were owed. Nearly 3,000 additional employees, all of whom had less than 10 years of service with the company, received nothing.

A decade later, ERISA established statutory requirements to preserve and protect the rights of employees to their pensions upon retirement. Among other things, ERISA defines what a plan fiduciary is and sets standards for their conduct.

Who is—and who isn’t—a plan fiduciary?
ERISA defines a fiduciary as a person who:

  1. Exercises discretionary authority or control over the management of an employee benefit plan or the disposition of its assets,
  2. Gives investment advice about plan funds or property for a fee or compensation or has the authority to do so,
  3. Has discretionary authority or responsibility in plan administration, or
  4. Is designated by a named fiduciary to carry out fiduciary responsibility. (ERISA requires the naming of one or more fiduciaries to be responsible for managing the plan's administration, usually a plan administrator or administrative committee, though the plan administrator may engage others to perform some administrative duties).

If you’re still unsure about exactly who is and isn’t a plan fiduciary, don’t worry, you’re not alone. Disagreements over whether or not a person acting in a certain capacity and in a specific situation is a fiduciary have sometimes required legal proceedings to resolve them. Here are some real-world examples.

Employers who maintain employee benefit plans are typically considered fiduciaries by virtue of being named fiduciaries or by acting as a functional fiduciary. Accordingly, employer decisions on how to execute the intent of the plan are subject to ERISA’s fiduciary standards.

Similarly, based on case law, lawyers and consultants who effectually manage an employee benefit plan are also generally considered fiduciaries.

A person or company that performs purely administrative duties within the framework, rules, and procedures established by others is not a fiduciary. Examples of such duties include collecting contributions, maintaining participants' service and employment records, calculating benefits, processing claims, and preparing government reports and employee communications.

What are a fiduciary’s responsibilities?
ERISA requires fiduciaries to discharge their duties solely in the interest of plan participants and beneficiaries, and for the exclusive purpose of providing benefits for them and defraying reasonable plan administrative expenses. Specifically, fiduciaries must perform their duties as follows:

  1. With the care, skill, prudence, and diligence of a prudent person under the circumstances;
  2. In accordance with plan documents and instruments, insofar as they are consistent with the provisions of ERISA; and
  3. By diversifying plan investments so as to minimize risk of loss under the circumstances, unless it is clearly prudent not to do so.

A fiduciary is personally liable to the plan for losses resulting from a breach of their fiduciary responsibility, and must restore to the plan any profits realized on misuse of plan assets. Not only is a fiduciary liable for their own breaches, but also if they have knowledge of another fiduciary's breach and either conceals it or does not make reasonable efforts to remedy it.

ERISA provides for a mandatory civil penalty against a fiduciary who breaches a fiduciary responsibility under ERISA or commits a violation, or against any other person who knowingly participates in such breach or violation. That penalty is equal to 20 percent of the "applicable recovery amount" paid pursuant to any settlement agreement with ERISA or ordered by a court to be paid in a judicial proceeding instituted by ERISA.

ERISA also permits a civil action to be brought by a participant, beneficiary, or other fiduciary against a fiduciary for a breach of duty. ERISA allows participants to bring suit to recover losses from fiduciary breaches that impair the value of the plan assets held in their individual accounts, even if the financial solvency of the entire plan is not threatened by the alleged fiduciary breach. Courts may require other appropriate relief, including removal of the fiduciary.

Over the coming months, we’ll share a series of blogs for employee benefit plan fiduciaries, covering everything from common terminology to best practices for plan documentation, suggestions for navigating fiduciary risks, and more.

Article
What's in a name? A lot, if you manage a benefit plan.

Editor's note: Read this if you are a leader in higher education.

The Department of Education has released guidance to colleges and universities on how the CARES Act grants to institutions, under the Higher Education Emergency Relief Fund (HEERF), may be used. The guidance comes in the form of answers to frequently asked questions, which we recommend institutions read before accepting the funds. Some key answers included in the document:

  1. A school has to participate in the HEERF funding to be used for grants to students to get the institutional share.
  2. Schools can use these funds to cover the costs of refunds for room and board provided as a result of campus closure.
  3. These funds can be used to make additional emergency financial aid grants to students impacted by campus closure.

We urge schools to retain supporting documentation of the proper use of these funds to allow for a compliance audit, should that be required. 

Questions?
Please contact Renee Bishop, Sarah Belliveau, or Mark LaPrade. We’re here to help.

Article
The Higher Education Emergency Relief Fund (HEERF): Guidelines

BerryDunn’s Healthcare/Not-for-Profit Practice Group members have been working closely with our clients as they navigate the effect the COVID-19 pandemic will have on their ability to sustain and advance their missions.

We have collected several of the questions we received, and the answers provided, so that you may also benefit from this information. We will be updating our COVID-19 Resources page regularly. If you have a question you would like to have answered, please contact Sarah Belliveau, Not-for-Profit Practice Area leader, at sbelliveau@berrydunn.com.

The following questions and answers have been compiled into categories: stabilization, cash flow, financial reporting, endowments and investments, employee benefits, and additional considerations.

STABILIZATION
Q: Is all relief focused on small to mid-size organizations? What can larger nonprofit organizations participate in for relief?
A:

We have learned that there is an as-yet-to-be-defined loan program for mid-sized employers between 500-10,000 employees. You can find information in the Loans Available for Nonprofits section (link below) of  the CARES Act as well as on the Independent Sector CARES Act web page, which will be updated regularly.

Q: Should I perform financial modeling so I can understand the impact this will have on my organization? Things are moving so fast, how do I know what federal programs are available to provide assistance?
A:

The first step in developing a short-term model to navigate the next few months is to gain an understanding of the programs available to provide assistance. These resources summarize some information about available programs:

Loans Available for Nonprofits in the CARES Act
Families First Coronavirus Response Act (FFCRA): FAQs for Businesses
CARES Act Tax Provisions for Not-for-Profit Organizations

The next step is to develop scenarios ranging from best case to worst case to analyze the potential impact of revenue and/or cost reductions on the organization. Modeling the various options available to you will help to determine which program is best for your organization. Each program achieves a different objective – for instance:

  • The Paycheck Protection Program can assist in retaining employees in the short term.
  • The Emergency Economic Injury Grants are helpful in covering a small immediate liquidity need.
  • The Small Business Debt Relief Program provides aid to those concerned with making SBA loan payments.

Additionally, consider non-federal options, such as discussing short-term deferrals with your current bank.

Q: How should I create a financial forecast/model for the next year?
A:

If you have the benefit of waiting, this is likely a time period in which it makes sense to delay significant in-depth forecasting efforts, particularly if your business environment is complicated or subject to significantly volatility as a result of recent events. The concern with beginning to model for future periods, outside of the next three-to-six months, is that you’ll be using information that is incomplete and ever-changing. This could lead to snap judgments that are short-term in nature and detrimental to long-term planning and success of your organization. 

With that said, we recognize that delaying this analysis will be unsettling to many CFOs and business managers who need to have a strategy moving forward. In developing this model for next year, consider the following elements of a strong model:

  1. Flexible and dynamic – Allow room for the model to adapt as more information is available and as additional insight is requested by your constituents (board members, department heads, lenders, etc.).
  2. Prioritize – Start with your big-ticket items. These should be the items that drive results for the organization. Determine what your top two to three revenue and expense categories are and focus on wrapping your arms around the future of those. From there, look for other revenue and expense sources that show correlation with one of the big two to three. Using a dynamic model, these should be automatically updated when assumptions on correlated items change. Don’t waste time on items that likely don’t impact decision making. Finally, build consensus on baseline assumptions, whether it be through management or accounting team, the board, or finance committee.
  3. Stress-test – Provide for the reality that your assumptions, and thus model, will be wrong. Develop scenarios that run from best-case to worst-case. Be honest with your assumptions.
  4. Identify levers – As you complete stress-testing, identify your action plan under different circumstances. What are expenditures that can be deferred in a worst-case scenario? What does staffing look like at various levels?
  5. Cash is king – The focus on forecasting and modeling is often on the net income of the organization and the cash flows generated. In a time such as this, the exercise is likely to focus on future liquidity. Remember to consider your non-income and expense items that impact cash flow, such as principal payments on debt service, planned additions to property & equipment, receipts on pledge payments, and others.  
CASH FLOW
Q: How can I alleviate cash flow strain in the near term?
A:

While the House and Senate have reacted quickly to bring needed relief to individuals and businesses across the country, the reality for most is that more will need to be done to stabilize. Operationally, obvious responses in the short term should be to eliminate all nonessential purchasing and maximize the billing and collection functions in accounts receivable. Another option is to utilize or increase an existing line of credit, or establish a new line of credit, to alleviate short term cash flow shortfalls. Organizations with investment portfolios can consider the prudence of increasing the spending draw on those funds. Rather than making a few drastic changes, organizations should take a multi-faceted approach to reduce the strain on cash flow while protecting the long term sustainability of the mission.

Q: How can I increase my organization’s reach to help with disaster relief? If we establish a special purpose fund, what should my organization be thinking about?
A:

Many organizations are looking for ways to increase their direct impact and give funding to individuals or organizations they may not have historically supported. For those who are want to expand their grant or gift making or want to establish a disaster relief fund, there are things to consider when doing so to help protect the organization. The nonprofit experts at Hemenway & Barnes share their thoughts on just how to do that.

FINANCIAL REPORTING
Q: What accounting standards have been delayed or are in the process of being delayed?
A:

FASB:
The $2.2 trillion stimulus package includes a provision that would allow banks the temporary option to delay compliance with the current expected credit losses (CECL) accounting standard. This would be delayed until the earlier end of the fiscal year or the end of the coronavirus national emergency.

GASB:
On March 26, 2020, the Governmental Accounting Standards Board (GASB) announced it has added a project to its current technical agenda to consider postponing all Statement and Implementation Guide provisions with an effective date that begins on or after reporting periods beginning after June 15, 2018. The GASB has received numerous requests from state and local government officials and public accounting firms regarding postponing the upcoming effective dates of pronouncements as these state and local government offices are closed and officials do not have access to the information needed to implement the Statements. Most notably this would include Statement No. 84, Fiduciary Activities, and Statement No. 87, Leases.

The Board plans to consider an Exposure Draft for issuance in April and finalize the guidance in May 2020.

ENDOWMENTS AND INVESTMENTS 
Q: What should I consider with regard to endowments?
A:

Many nonprofits with endowments are considering ways to balance an increased reliance on their investment portfolios with the responsibility to protect and preserve the spending power of donor-restricted gifts. Some things to think about include the existence (or absence) of true restrictions, spending variations under the Uniform Prudent Management of Institutional Funds Act (UPMIFA) applicable in your state, borrowing from an endowment, or requesting from the donor the release of restrictions. All need to be balanced with the intended duration and preservation of the endowment fund. Hemenway & Barnes shares their thoughts relative to the utilization of endowments during this time of need.

EMPLOYEE BENEFITS
Q: We are going to suspend our retirement plan match through June 30, 2020 and I picked a start date of April 1st. What we need help with is our bi-weekly payroll (which is for HOURLY employees). Their next pay date is April 3rd, for time worked through March 28th. Time worked March 29-31 would be paid on April 17th. How should we handle the match during this period for the hourly employees?
A:

The key for determining what to include for the matching calculation is when it is paid, not when it was earned. If the amendment is effective April 1st, then any amounts paid after April 1st would not have matching contributions calculated. This means that the amounts paid on April 3rd would not have any matching contributions calculated.

Q: Can you please provide guidance on the Families First Coronavirus Response Act (FFCRA) and how it may impact my organization?
A:

On March 30th, BerryDunn published a blog post to help answer your questions around the FFCRA.

If you have additional questions, please contact one of our Employee Benefit Plan professionals

ADDITIONAL CONSIDERATIONS
Q: I heard there was going to be an incentive for charitable giving in the new act. What's that all about?
A:

According to Sections 2204 and 2205 of the CARES Act:

  • Up to $300 of charitable contributions can be taken as a deduction in calculating adjusted gross income (AGI) for the 2020 tax year. This will provide a tax benefit even to those who do not itemize.
  • For the 2020 tax year, the tax cap has been lifted for:
    • Individuals-from 60% of AGI to 100%
    • Corporations-annual limit is raised from 10% to 25% (for food donations this is raised from 15% to 25%)
Q: Have you heard if the May 15th tax deadline will be extended?
A:

Unfortunately, we have not heard. As of April 6th, the deadline has not been extended.

Q: Could you please summarize for me the tax provisions in the CARES Act that you think are most applicable to not-for-profits?
A: Absolutely! Our not-for-profit tax professionals have compiled this document, which provides a high-level outline of tax provisions in the CARES Act that we believe would be of interest to our clients.

We are here to help
Please contact the BerryDunn not-for-profit team if you have any questions, or would like to discuss your specific situation.

Article
COVID-19 FAQs—Not-for-Profit Edition

Benchmarking doesn’t need to be time and resource consuming. Read on for four simple steps you can take to improve efficiency and maximize resources.

Stop us if you’ve heard this one before (from your Board of Trustees or Finance Committee): “I wish there was a way we could benchmark ourselves against our competitors.”

Have you ever wrestled with how to benchmark? Or struggled to identify what the Board wants to measure? Organizations can fall short on implementing effective methods to benchmark accurately. The good news? With a planned approach, you can overcome traditional obstacles and create tools to increase efficiency, improve operations and reporting, and maintain and monitor a comfortable risk level. All of this creates competitive advantage — and isn’t as hard as you might think.

Even with a structured process, remember that benchmarking data has pitfalls, including:

  • Peer data can be difficult to find. Some industries are better than others at tracking this information. Some collect too much data that isn’t relevant, making it hard to find the data that is.
     
  • The data can be dated. By the time you close your books for the year and data is available, you’re at least six months into the next fiscal year. Knowing this, you can still build year-over-year models you can measure consistently.
     
  • The underlying data may be tainted. As much as we’d like to rely on financial data from other organization and industry surveys, there’s no guarantee that all participants have applied accounting principles consistently, or calculated inputs (full-time equivalents), in the same way, making comparisons inaccurate.

Despite these pitfalls, it is a useful tool for your organization. It lets you take stock of your current financial condition and risk profile, identify areas for improvement and find a realistic and measurable plan to strengthen your organization.

Here are four steps to take to start a successful benchmarking program and overcome these pitfalls:

  1. Benchmark against yourself. Use year-over-year and month-to-month data to identify trends, inconsistencies and unexplained changes. Once you have the information, you can see where you want to direct improvement efforts.
  2. Look to industry/peer data. We’d love to tell you that all financial statements and survey inputs are created equally, but we can’t. By understanding the source of your information, and the potential strengths and weaknesses in the data (e.g., too few peers, different size organizations and markets, etc.), you will better know how to use it. Understanding the data source allows you to weigh metrics that are more susceptible to inconsistencies.
  1. Identify what is important to your organization and focus on it. Remove data points that have little relevance for your organization. Trying to address too many measures is one of the primary reasons benchmarking fails. Identify key metrics you will target, and watch them over time. Remember, keeping it simple allows you to put resources where you need them most.
  1. Use the data as a tool to guide decisions. Identify aspects of the organization that lie beyond your risk tolerance and then define specific steps for improvement.

Once you take these steps, you can add other measurement strategies, including stress testing, monthly reporting, use in budgeting, and forecasting. By taking the time to create and use an effective methodology, competitive advantage can be yours. Want to learn more? Check out our resources for not-for-profit organizations here.

Article
Benchmarking: Satisfy your board and gain a competitive advantage

Read this if you use QuickBooks Online.

You should be running reports in QuickBooks Online on a weekly—if not daily—basis. Here’s what you need to know.

You can do a lot of your accounting work in QuickBooks Online by generating reports. You can maintain your customer and vendor profiles. Create and send transactions like invoices and sales receipts, and record payments. Enter and pay bills. Create time records and coordinate projects. Track your mileage and, if you have employees, process payroll.

These activities help you document your daily financial workflow. But if you’re not using QuickBooks Online’s reports, you can’t know how individual elements of your business like sales and purchases are doing. And you don’t know how all of those individual pieces fit together to create a comprehensive picture of how your business is performing. 

QuickBooks Online’s reports are plentiful. They’re customizable. They’re easy to create. And they’re critical to your understanding of your company’s financial state. They answer the small questions, like, How many widgets do I need to order?, and the larger, all-encompassing questions like, Will my business make a profit this year?

Getting the lay of the land

Let’s look at how reports are organized in QuickBooks Online. Click Reports in the toolbar. You’ll see they are divided into three areas that you can access by clicking the labeled tabs. Standard refers to the comprehensive list of reports that QuickBooks Online offers, displayed in related groups. Custom reports are reports that you’ve customized and saved so you can use the same format later. And Management reports are very flexible, specialized reports that can be used by company owners and managers.


A partial view of the list of QuickBooks Online’s Standard reports 

Standard reports

The Standard Reports area is where you’ll do most—if not all—of your reporting work. The list of available reports is divided into 10 categories. You’re most likely to spend most of your time in just a few of them, including:

  • Favorites. You’ll be able to designate reports that you run often as Favorites and access them here, at the top of the list.
  • Who owes you. These are your receivables reports. You’ll come here when you need to know, for example, who is behind on making payments to you, how much individual customers owe you, and what billable charges and time haven’t been billed.
  • Sales and customers. What’s selling and what’s not? What have individual customers been buying? Which customers have accumulated billable time?
  • What you owe. These are your payables reports. They tell you, for example, which bills you haven’t paid, the total amount of your unpaid bills (grouped by days past due), and your balances with individual vendors.
  • Expenses and vendors. What have I purchased (grouped by vendor, product, or class)? What expenses have individual vendors incurred? Do I have any open purchase orders?

The Business Overview contains advanced financial reports that we can run and analyze for you. The same goes for the For my accountant reports. Sales tax, Employees, and Payroll will be important to you if they’re applicable for your company.

Working with individual reports


Each individual report in QuickBooks Online has three related task options.

To open any report, you just click its title. If you want more information before you do that, just hover your cursor over the label. Click the question mark to see a brief description of the report. If you want to make the report a Favorite, click the star so it turns green. And clicking the three vertical dots opens the Customize link. 

When you click the Customize link, a vertical panel slides out from the right, and the actual report is behind it, grayed out. Customization options vary from report to report. Some are quite complex, and others offer fewer options. The Sales by Customer Detail report, for example, provides a number of ways for you to modify the content of your report so it represents exactly the “slice” of data you want. So you can indicate your preferences in areas like:

  • Report period
  • Accounting method (cash or accrual)
  • Rows/columns (you can select which columns should appear and in what order, and group them by Account, Customer, Day, etc.)
  • Filter (choose the data group you want represented from several options, including Transaction Type, Product/Service, Payment Method, and Sales Rep)

Once you’ve run the report, you can click Save customization in the upper right corner and complete the fields in the window that opens. Your modification options will then be available when you click Custom reports, so you can run it again anytime with fresh data.


You can customize QuickBooks Online’s reports in a variety of ways.

We’ll go into more depth about report customization in a future article. For now, we encourage you to explore QuickBooks Online’s reports and their modification options so that you’re familiar with them and can put them to use anytime. Contact our Outsourced Accounting team if you have any questions about the site’s reports, or if you need help making your use of QuickBooks Online more effective and productive.

Article
Getting started with reports in QuickBooks Online

Read this if you are a financial institution.

As you know by now, ASU No. 2016-13, Financial Instruments – Credit Losses (Topic 326), better known as the CECL standard, has already been implemented for some and will soon be implemented for all others (fiscal years beginning after December 15, 2022 to be exact). During your implementation process, the focus has likely been on your loan portfolio, and rightfully so, as CECL overhauls 40+ years of loan loss reserve practices. But, recall that the CECL standard applies to all financial instruments carried at amortized cost. So, it therefore includes held-to-maturity (HTM) debt securities. And, although not carried at amortized cost, the CECL standard also makes targeted enhancements to available-for-sale (AFS) debt securities. As if re-hauling your entire allowance methodology wasn’t enough! Before tearing out your hair because of another CECL-related change, let’s quickly review what is currently required for securities, and then focus on how this will change when you implement CECL.

Current US GAAP

Under current US generally accepted accounting principles (GAAP), direct write-downs on HTM and AFS debt securities are recorded when (1) a security’s fair value has declined below its amortized cost basis and (2) the impairment is deemed other-than-temporary. This assessment must be completed on an individual debt security basis. Providing a general allowance for unidentified impairment in a portfolio of securities is not appropriate. The previous amortized cost basis less the other-than-temporary impairment (OTTI) recognized in earnings becomes the new amortized cost basis and subsequent recoveries of OTTI may not be directly reversed into interest income. Rather, subsequent recoveries of credit losses must be accreted into interest income.

CECL: Held-to-maturity securities

Then comes along CECL  and changes everything. Once the CECL standard is implemented, expected losses on HTM debt securities will be recorded immediately through an allowance for credit loss (ACL) account, rather than as a direct write-down of the security’s cost basis. These securities should be evaluated for risk of loss over the life of the securities. Another key difference from current GAAP is that securities with similar risk characteristics will need to be assessed for credit losses collectively, or on a pool basis, not on an individual basis as currently prescribed. Also, contrary to current GAAP, since expected losses will be recorded through an ACL account, subsequent improvements in cash flow expectations will be immediately recognized through earnings via a reduction in the ACL account. CECL effectively eliminates the direct write-down method, with write-offs only occurring when the security, or a portion thereof, is deemed to be uncollectible. 

In practice, there may be some types of HTM debt securities that your institution believes have no risk of nonpayment and thus risk of loss is zero. An example may be a US Treasury debt security or possibly a debt security guaranteed by a government-sponsored enterprise, such as Ginnie Mae or Freddie Mac. In these instances, it is acceptable to conclude that no allowance on such securities is necessary. However, such determination should be documented and changes to the credit situation of these securities should be closely monitored.

Financial institutions that have already implemented CECL have appreciated its flexibility; however, just like anything else, there are challenges. One of the biggest questions that has risen is related to complexity, specifically from financial statement users in regards to the macroeconomic assumptions used in models. Another common challenge is comparability to competitors’ models and estimates. Each financial institution will likely have a different methodology when recording expected losses on HTM debt securities due to the judgment involved. These concerns are not unique to the ACL on HTM debt securities but are nonetheless concerns that will need to be addressed. A description of the methodology used to estimate the ACL, as well as a discussion of the factors that influenced management’s current estimate of expected losses must be disclosed in the financial statements. Therefore, management should ensure adequate information is provided to address financial statement users’ concerns.  

CECL: Available-for-sale securities

Upon CECL adoption, you are also expected to implement enhancements to existing practices related to AFS debt securities. Recall that AFS debt securities are recorded at fair value through accumulated other comprehensive income (AOCI). This will not change after adoption of the CECL standard. However, the concept of OTTI will no longer exist. Rather, if an AFS debt security’s fair value is lower than its amortized cost basis, any credit related loss will be recorded through an ACL account, rather than as a direct write-down to the security. This ACL account will be limited to the amount by which fair value is below the amortized cost basis of the security. Credit losses will be determined by comparing the present value of cash flows expected to be collected from the security with its amortized cost basis. Non-credit related changes in fair value will continue to be recorded through an investment contra account and other comprehensive income. So, on the balance sheet, AFS debt securities could have an ACL account and an unrealized gain/loss contra account. The financial institution will be responsible for determining if the decline in the value below amortized cost is the result of credit factors or other macroeconomic factors. In practice, the following flowchart may be helpful:

Although changes to debt securities may not be top of mind when working through CECL implementation, ensuring you reserve time to understand and assess the impact of these changes is important. Depending on the significance and composition of your institution’s debt security portfolio, these changes may have a significant impact on your financial institution’s financial statements from CECL adoption forward. For more information, visit the CECL page on our website. If you would like specific answers to questions about your CECL implementation, please visit our Ask the Advisor page to submit your questions.

Article
Don't forget about me! Changes in debt security accounting resulting from CECL 

Read this if you are at a financial institution.

While documentation of your CECL implementation and ongoing practices is essential to a successful outcome, it can sometimes feel like a very tall order when you are building a new methodology from the ground up. It may help to think of your CECL documentation as your methodology blueprint. While others will want to see it, you really need it to ensure that what you are building is well-designed, structurally sound, appropriately supported, and will hold up to subsequent “renovations” (model changes or tweaks). To help you focus on what’s essential, consider these documentation tips:

Getting started

Like any good architect, you need to understand the expectations for your design—what auditors and regulators want to see in your documentation. Two resources that can really help are the AICPA Practice Aid: Allowance for credit losses-audit considerations1, and the Interagency Supervisory Guidance on Model Risk Management2. One way to actively use these guides is to take note of the various section/subject headers and the key points, ideas, and questions highlighted within each, and turn that into your documentation checklist. You’ll also want to think strategically about where to keep the working document, who needs access to it, and how to maintain version control. It is also a good idea to decide up-front how you will reference, catalog, and store the materials (e.g., data files, test results, analyses, committee minutes, presentations, approvals, etc.) that helped you make and capture final decisions. You can download our CECL Documentation checklist now.   

What to watch out for

What’s new under CECL are areas requiring documentation (e.g., broader scope of “financial assets,” prepayments, forecasts, reversion, etc.). But watch out for elements that seem familiar—they may now have a new twist (e.g., segmentation, external data, Q factors, etc.). It’s a good idea to challenge any documentation from the past that you feel could be re-purposed or “rolled into” your CECL documentation. Be prepared also to spend time explaining or customizing vendor-provided documents (e.g., model design and development, data analysis memos, software procedures, etc.). 

While this material can give you a running start, they will not on their own satisfy auditor and regulator expectations. Ultimately, your documentation will need to reflect your own understanding and conclusions: how you considered, challenged, and got comfortable with the vendor’s work; what validations and testing you did over that work, and how you’ve translated this into policies and procedures appropriate for your institution’s operations, workflows, governance, and controls. For more information on making the vendor decision, and for suggestions of vendor selection criteria, read our previous article “CECL Readiness: Vendor or no vendor?” 

Point of view

It is human nature, especially whenever entering new territory, to want to know how others are approaching the task at hand. Related to CECL, networking, joining peer discussion groups, researching what and how those who have already adopted CECL are disclosing, are all great ways to see possibilities, learn, and gain perspective. When it comes to CECL documentation, however, the most important point of view to communicate is that of your institution’s management. Consider the difference in these two documentation approaches: (a) we looked at what others are doing, this is what most of them seem to be doing, so we are too; or (b) this is what we did and why we feel this decision is the best for our portfolio/risk profile; as part of our decision-making process, we did this type of benchmarking and discovered this. Example b is stronger documentation: your point of view is the primary focus, making it clear you reached your own conclusions. 

Other elements for CECL documentation

Documenting your CECL implementation, methodology, and model details is critical, but not the only documentation expected as you transition to CECL. It has been said that CECL is a much more enterprise-wide methodology, meaning that some of the model decisions or inputs may require you use data and assumptions traditionally controlled in other departments and for other purposes. One common example of this is prepayments. Up to this point, prepayment data may have been something between management and a vendor and used for management discussion and planning, but not necessarily validated, tested, or controlled for in the same way as your loss model calculations. Under CECL, this changes specifically because it is now an input into the loss estimate that lands in your financial statements. As a result, prepayments would be subject to, for example, “accuracy and completeness” considerations, among others (for more information on these expectations, refer to our earlier articles on data and segmentation). Prepayments is just one example, but does illustrate how CECL adoption will likely trigger updates to policies, procedures, governance, and controls across multiple areas of the organization.    

One final note: There are some new financial statement disclosures required with CECL adoption. Beyond those, there may be other CECL-related information either you want to share, or your audit/tax firm recommends be disclosed. Consulting with your auditor at least a quarter prior to adoption will help make sure you aren’t scrambling last minute to draft new language or tables.  

Struggling with CECL documentation or other elements of CECL? 

No matter what stage of CECL readiness you are in, we can help you navigate the requirements as efficiently and effectively as possible. For more information, visit the CECL page on our website. If you would like specific answers to questions about your CECL implementation, please visit our Ask the Advisor page to submit your questions.

For more tips on documenting your CECL adoption, stay tuned for our next article in the series. You can also follow Susan Weber on LinkedIn.

1You can find the AICPA Practice Aid here.
2The interagency guidance was released as OCC Bulletin 2011-12, FRB SR 11-7, and as FDIC FIL 22-2017

 

Article
CECL documentation: Your methodology blueprint

Read this if you use QuickBooks Online.

Are you taking on a worker who’s not an employee? QuickBooks Online includes tools for tracking and paying independent contractors.

The COVID-19 pandemic created millions of self-employed individuals and small businesses. Whether they chose to, or circumstances forced them to, these new entrepreneurs had to learn new ways to get paid and to prepare their income taxes.

If you’re thinking about taking on a contract worker, you, too, will have to educate yourself on the paperwork and processes required to comply with the IRS’ rules for his or her compensation. It’s much easier than hiring a full-time employee, but it still takes some knowledge of how QuickBooks Online handles these individuals.

You’ll also need to make certain that the person you’re hiring is indeed an independent contractor and not an employee. The IRS takes this distinction very seriously. If you’re at all unsure of your new hire’s employment status, we can help you sort it out.

Creating records for contractors

Once new contractors have accepted your offer, you’ll need to have then fill out an IRS Form W-9. You can download a copy here. Employees complete the more detailed Form W-4 so that the employer can withhold income taxes correctly, but you won’t have to withhold taxes for your contract workers. They will be responsible for calculating and paying quarterly estimated taxes and filing an IRS Form 1040 every year. 

You, though, will be responsible for sending them an IRS Form 1099-NEC (Non-Employee Compensation) every January if you paid them more than $600 during the previous year. You do not need to send a 1099-NEC to a corporation or to an LLC that is treated as a C Corp or an S Corp. 

You can complete the Vendor Information window for each independent contractor, checking the box in front of Track payments for 1099.

Using the information the contractors provide, you can create records for them in QuickBooks Online. If you don’t have a QuickBooks Payroll subscription, you can set them up as 1099 vendors. Click the Expenses tab in the toolbar and then on the Vendors tab. Click New vendor in the upper right to open the Vendor Information window. Complete the fields for the worker and be sure to check the box in front of Track payments for 1099, as shown in the partial image above.

The vendor records you create will appear in QuickBooks Online’s Vendors list (again, Expenses | Vendors). Click on one to open it. You can toggle between two tabs here. The first, Transaction List, will eventually display all your financial dealings with that contractor. Vendor Details opens the record you just created, which you can edit from this screen.

Paying contractors

When independent contractors send you invoices, you’ll return to this same screen. There are three ways you can pay them. Click the down arrow next to New Transaction in the upper right corner to see your options (or look down at the end of the row while you’re in list view). You can record the debt as a Bill if you want to pay it later (or if that’s the way you structure your recordkeeping). If you’re paying it right away, you can create an Expense or write a Check

You can choose an option from this vendor action menu to pay your independent contractors.

When you click one of these, QuickBooks Online opens a form with many of the contractors’ details already filled in. You’ll need to complete any additional fields at the top of the screen, and then either record the payment or debt under Category details or Item details, depending on how you do your bookkeeping. Either way, you’ll be able to enter the quantity and rate and/or amount and mark it billable (with a markup percentage, if you’d like) to a customer or project.

You’re probably going to want our help here, since there’s more than one way to pay independent contractors. If you subscribe to QuickBooks Payroll, you can use the service’s contractor features, which include the ability to invite your contractors to fill out their own records in QuickBooks Online. You may also want to add an account to your Chart of Accounts, and we’d want to offer guidance there. And you need to ensure that you’re classifying payments correctly, so they’ll appear in 1099 reports and 1099s themselves.

Creating records for independent contractors and paying these individuals seem like they should be simple operations. But anytime you’re dealing with payroll issues, you’re dealing with peoples’ livelihoods – and the IRS. We strongly encourage you to let us help you get this right. Contact the Outsourced Accounting team, and we’ll make sure you’re handling your worker payments with absolute accuracy.

Article
Hiring an independent contractor? How QuickBooks Online can help