Providing CECL information to your board: Best practices

Benchmarking doesn’t need to be time and resource consuming. Read on for four simple steps you can take to improve efficiency and maximize resources.

Stop us if you’ve heard this one before (from your Board of Trustees or Finance Committee): “I wish there was a way we could benchmark ourselves against our competitors.”

Have you ever wrestled with how to benchmark? Or struggled to identify what the Board wants to measure? Organizations can fall short on implementing effective methods to benchmark accurately. The good news? With a planned approach, you can overcome traditional obstacles and create tools to increase efficiency, improve operations and reporting, and maintain and monitor a comfortable risk level. All of this can help create a competitive advantage — and it  isn’t as hard as you might think.

Even with a structured process, remember that benchmarking data has pitfalls, including:

• Peer data can be difficult to find. Some industries are better than others at tracking this information. Some collect too much data that isn’t relevant, making it hard to find the data that is.
   
• The data can be dated. By the time you close your books for the year and data is available, you’re at least six months into the next fiscal year. Knowing this, you can still build year-over-year trending models that you can measure consistently.
   
• The underlying data may be tainted. As much as we’d like to rely on financial data from other organization and industry surveys, there’s no guarantee that all participants have applied accounting principles consistently, or calculated inputs (e.g., full-time equivalents) in the same way, making comparisons inaccurate.

Despite these pitfalls, benchmarking is a useful tool for your organization. Benchmarking lets you take stock of your current financial condition and risk profile, identify areas for improvement and find a realistic and measurable plan to strengthen your organization.

Here are four steps to take to start a successful benchmarking program and overcome these pitfalls:

1. Benchmark against yourself. Use year-over-year and month-to-month data to identify trends, inconsistencies and unexplained changes. Once you have the information, you can see where you want to direct improvement efforts.
2. Look to industry/peer data. We’d love to tell you that all financial statements and survey inputs are created equally, but we can’t. By understanding the source of your information, and the potential strengths and weaknesses in the data (e.g., too few peers, different size organizations and markets, etc.), you will better know how to use it. Understanding the data source allows you to weigh metrics that are more susceptible to inconsistencies.

3. Identify what is important to your organization and focus on it. Remove data points that have little relevance for your organization. Trying to address too many measures is one of the primary reasons benchmarking fails. Identify key metrics you will target, and watch them over time. Remember, keeping it simple allows you to put resources where you need them most.

4. Use the data as a tool to guide decisions. Identify aspects of the organization that lie beyond your risk tolerance and then define specific steps for improvement.

Once you take these steps, you can add other measurement strategies, including stress testing, monthly reporting, and use in budgeting and forecasting. By taking the time to create and use an effective methodology, this competitive advantage can be yours. Want to learn more? Check out our resources for not-for-profit organizations here.

Do you know what would happen to your company if your CEO suddenly had to resign immediately for personal reasons? Or got seriously ill? Or worse, died? These scenarios, while rare, do happen, and many companies are not prepared. In fact, 45% of US companies do not have a contingency plan for CEO succession, according to a 2020 Harvard Business Review study.  

Do you have a plan for CEO succession? As a business owner, you may have an exit strategy in place for your company, but do you have a plan to bridge the leadership gap for you and each member of your leadership team? Does the plan include the kind of crises listed above? What would you do if your next-in-line left suddenly? 

Whether yours is a family-owned business, a company of equity partners, or a private company with a governing body, here are things to consider when you’re faced with a situation where your CEO has abruptly departed or has decided to step down.  

1. Get a plan in place. First, assess the situation and figure out your priorities. If there is already a plan for these types of circumstances, evaluate how much of it is applicable to this particular circumstance. For example, if the plan is for the stepping down or announced retirement of your CEO, but some other catastrophic event occurs, you may need to adjust key components and focus on immediate messaging rather than future positioning. If there is no plan, assign a small team to create one immediately. 

Make sure management, team leaders, and employees are aware and informed of your progress; this will help keep you organized and streamline communications. Management needs to take the lead and select a point person to document the process. Management also needs to take the lead in demeanor. Model your actions so employees can see the situation is being handled with care. Once a strategy is identified based on your priorities, draft a plan that includes what happens now, in the immediate future, and beyond. Include timetables so people know when decisions will be made.  

2. Communicate clearly, and often. In times of uncertainty, your employees will need as much specific information as you can give them. Knowing when they will hear from you, even if it is “we have nothing new to report” builds trust and keeps them vested and involved. By letting them know what your plan is, when they’ll receive another update, what to tell clients, and even what specifics you can give them (e.g., who will take over which CEO responsibility and for how long), you make them feel that they are important stakeholders, and not just bystanders. Stakeholders are more likely to be strong supporters during and after any transition that needs to take place. 

3. Pull in professional help. Depending on your resources, we recommend bringing in a professional to help you handle the situation at hand. At the very least, call in an objective opinion. You’ll need someone who can help you make decisions when emotions are running high. Bringing someone on board that can help you decipher what you have to work with and what your legal and other obligations may be, help rally your team, deal with the media, and manage emotions can be invaluable during a challenging time. Even if it’s temporary. 

4. Develop a timeline. Figure out how much time you have for the transition. For example, if your CEO is ill and will be stepping down in six months, you have time to update any existing exit strategy or succession plan you have in place. Things to include in the timeline: 

• Who is taking over what responsibilities? 
• How and what will be communicated to your company and stakeholders? 
• How and what will be communicated to the market? 
• How will you bring in the CEO's replacement, while helping the current CEO transition out of the organization? 

If you are in a crisis situation (e.g., your CEO has been suddenly forced out or asked to leave without a public explanation), you won’t have the luxury of time.  

Find out what other arrangements have been made in the past and update them as needed. Work with your PR firm to help with your change management and do the right things for all involved to salvage the company’s reputation. When handled correctly, crises don’t have to have a lasting negative impact on your business.   

5. Manage change effectively. When you’re under the gun to quickly make significant changes at the top, you need to understand how the changes may affect various parts of your company. While instinct may tell you to focus externally, don’t neglect your employees. Be as transparent as you possibly can be, present an action plan, ask for support, and get them involved in keeping the environment positive. Whether you bring in professionals or not, make sure you allow for questions, feedback, and even discord if challenging information is being revealed.  

6. Handle the media. Crisis rule #1 is making it clear who can, and who cannot, speak to the media. Assign a point person for all external inquiries and instruct employees to refer all reporter requests for comment to that point person. You absolutely do not want employees leaking sensitive information to the media. 
 
With your employees on board with the change management action plan, you can now focus on external communications and how you will present what is happening to the media. This is not completely under your control. Technology and social media changed the game in terms of speed and access to information to the public and transparency when it comes to corporate leadership. Present a message to the media quickly that coincides with your values as a company. If you are dealing with a scandal where public trust is involved and your CEO is stepping down, handling this effectively will take tact and most likely a team of professionals to help. 

Exit strategies are planning tools. Uncontrollable events occur and we don’t always get to follow our plan as we would have liked. Your organization can still be prepared and know what to do in an emergency situation or sudden crisis.  Executives move out of their roles every day, but how companies respond to these changes is reflective of the strategy in place to handle unexpected situations. Be as prepared as possible. Own your challenges. Stay accountable. 

BerryDunn can help whether you need extra assistance in your office during peak times or interim leadership support during periods of transition. We offer the expertise of a fully staffed accounting department for short-term assignments or long-term engagements―so you can focus on your business. Meet our interim assistance experts.

Read this if your CFO has recently departed, or if you're looking for a replacement.

With the post-Covid labor shortage, “the Great Resignation,” an aging workforce, and ongoing staffing concerns, almost every industry is facing challenges in hiring talented staff. To address these challenges, many organizations are hiring temporary or interim help—even for C-suite positions such as Chief Financial Officers (CFOs).

You may be thinking, “The CFO is a key business partner in advising and collaborating with the CEO and developing a long-term strategy for the organization; why would I hire a contractor to fill this most-important role?” Hiring an interim CFO may be a good option to consider in certain circumstances. Here are three situations where temporary help might be the best solution for your organization.

Your organization has grown

If your company has grown since you created your finance department, or your controller isn’t ready or suited for a promotion, bringing on an interim CFO can be a natural next step in your company’s evolution, without having to make a long-term commitment. It can allow you to take the time and fully understand what you need from the role — and what kind of person is the best fit for your company’s future.

BerryDunn's Kathy Parker, leader of the Boston-based Outsourced Accounting group, has worked with many companies to help them through periods of transition. "As companies grow, many need team members at various skill levels, which requires more money to pay for multiple full-time roles," she shared. "Obtaining interim CFO services allows a company to access different skill levels while paying a fraction of the cost. As the company grows, they can always scale its resources; the beauty of this model is the flexibility."

If your company is looking for greater financial skill or advice to expand into a new market, or turn around an underperforming division, you may want to bring on an outsourced CFO with a specific set of objectives and timeline in mind. You can bring someone on board to develop growth strategies, make course corrections, bring in new financing, and update operational processes, without necessarily needing to keep those skills in the organization once they finish their assignment. Your company benefits from this very specific skill set without the expense of having a talented but expensive resource on your permanent payroll.

Your CFO has resigned

The best-laid succession plans often go astray. If that’s the case when your CFO departs, your organization may need to outsource the CFO function to fill the gap. When your company loses the leader of company-wide financial functions, you may need to find someone who can come in with those skills and get right to work. While they may need guidance and support on specifics to your company, they should be able to adapt quickly and keep financial operations running smoothly. Articulating short-term goals and setting deadlines for naming a new CFO can help lay the foundation for a successful engagement.

You don’t have the budget for a full-time CFO

If your company is the right size to have a part-time CFO, outsourcing CFO functions can be less expensive than bringing on a full-time in-house CFO. Depending on your operational and financial rhythms, you may need the CFO role full-time in parts of the year, and not in others. Initially, an interim CFO can bring a new perspective from a professional who is coming in with fresh eyes and experience outside of your company.

After the immediate need or initial crisis passes, you can review your options. Once the temporary CFO’s agreement expires, you can bring someone new in depending on your needs, or keep the contract CFO in place by extending their assignment.

Considerations for hiring an interim CFO

Making the decision between hiring someone full-time or bringing in temporary contract help can be difficult. Although it oversimplifies the decision a bit, a good rule of thumb is: the more strategic the role will be, the more important it is that you have a long-term person in the job. CFOs can have a wide range of duties, including, but not limited to:

• Financial risk management, including planning and record-keeping
• Management of compliance and regulatory requirements
• Creating and monitoring reliable control systems
• Debt and equity financing
• Financial reporting to the Board of Directors

If the focus is primarily overseeing the financial functions of the organization and/or developing a skilled finance department, you can rely — at least initially — on a CFO for hire.

Regardless of what you choose to do, your decision will have an impact on the financial health of your organization — from avoiding finance department dissatisfaction or turnover to capitalizing on new market opportunities. Getting outside advice or a more objective view may be an important part of making the right choice for your company.

BerryDunn can help whether you need extra assistance in your office during peak times or interim leadership support during periods of transition. We offer the expertise of a fully staffed accounting department for short-term assignments or long-term engagements―so you can focus on your business. Meet our interim assistance experts.

On June 16^th the FASB issued the final standard for credit losses. We’ve analyzed the new standard and pulled together some key items you’ll need to know:

It looks like you should be able to implement CECL without purchasing expensive third-party models, if your institution is able to get adequate historical data from your core system and has the personnel available to crunch the numbers. Following is one approach that should pass muster with regulators (and, hopefully, the PCAOB):

1. Determine loans for which specific reserves are appropriate, much as you are currently doing. The notion of “impaired” loans goes away; a loan should be evaluated specifically if the institution becomes aware of loan-specific information indicating it has an exposure to loss that differs from other loans it would otherwise be pooled with. In practice, we think that’ll be largely the same loans that are currently being identified as impaired.
2. For the rest of the portfolio: Group loans by common characteristics – same as you’re doing now.
   1. For each group, create subgroups for each origination year. It looks like current year and previous four years are the critical ones to focus on; anything older than five years could probably be lumped together.
   2. For each subgroup, establish economic and other relevant conditions for the average term of loans in the subgroup. This includes actual conditions from year of origination to the present, forecasted conditions for the near future, and long-term historical conditions for the remaining average loan term
      • Select an historical loss period that best approximates the conditions established in (b) above.
      • Determine average lifetime chargeoffs for that historical loss period for each loan type
      • Adjust that average for any current or expected conditions that you believe are different from this historical data.  Such adjustments should be based on the institution’s chargeoff experience when similar conditions occurred in the past.  An example might be an actual or expected decline in real estate values that you believe is more pronounced than in the historical loss period chosen.

While not specifically mentioned in the guidance, we believe a modest unallocated allowance is still supportable, especially since imprecision is certainly higher when factoring in expected losses in addition to incurred losses.
 

Other points that caught our eye:

1. The guidance applies to purchased loans with credit deterioration, as well as originated loans. That will create more comparability in terms of the allowance as a % of loans for institutions that have done acquisitions vs. those who haven’t. An interesting twist, though – for acquired loans that have experienced a more-than-insignificant deterioration in credit quality since origination, the allowance established is simply an adjustment to (ultimately) the premium or discount, while for other loans acquired in the transaction, an allowance is established with an offset to loan loss expense at acquisition. 
2. The guidance applies to held-to-maturity debt securities, and there’s specific guidance that affects the accounting for available-for-sale debt securities as well. These will likely only come into play for institutions with private-label mortgage-backed securities and/or corporate bonds. However, some of the CECL disclosure requirements apply to securities as well; in particular, the one that caught our eye was the requirement in ASC 326-20-50-5 to disclose credit quality indicators (e.g., S&P ratings) for securities as well as loans.
3. Surprisingly, you continue to assume no change in future interest rates for purposes of establishing expected credit losses for specific variable rate loans. We think FASB may have missed the boat on this one, as resetting ARMs were one of the factors that led to the 2008 crisis that CECL is intended to be responsive to.
4. There will obviously be much, much more dialogue about these new rules, and we’ll need to begin the process of helping you understand them and prepare for implementation sooner rather than later.

Please call us if you have any questions.

When last we blogged about the Financial Accounting Standards Board’s (FASB) new “current expected credit losses” (CECL) model for estimating an allowance for loan and lease losses (ALLL), we reviewed the process for developing reasonable and supportable forecasts for use in establishing the ALLL. Once you develop those forecasts, how does that information translate into amounts to set aside for loan losses?

A portion of the ALLL will continue to be based on specifically identified loans you’re concerned about. For those loans, you will continue to establish a specific component of the ALLL based on your estimate of the loss ultimately expected on the loans.

The tricky part, of course, is estimating an ALLL for the other 99% of the loan portfolio. This is where the forecasts come in. The new rules do not prescribe a particular methodology, and banking regulators have indicated community banks will likely be able to continue with their current approach, adjusted to use appropriate inputs in a manner that complies with the CECL model. One of the biggest challenges is the expectation in CECL that the ALLL will be estimated using the institution’s historical information, to the extent available and relevant.

Following is just one of many ways  you can approach it. I’ve also included a link at the end of this article to an example illustrating this approach.

Step One: Historical Loss Factors

1. First, for a given subset of the loan portfolio (e.g., the residential loan pool), you might first break down the portfolio by the number of years remaining until expected payoff (via maturity or refinancing). This is important because, on average, a loan with seven years remaining until expected payoff will have a higher level of remaining lifetime losses than a loan with one year remaining. It therefore generally wouldn’t be appropriate to use the same loss factor for both loans.
    
2. Next, decide on a set of drivers that tend to correlate with loan losses over time. FASB has indicated it doesn’t expect highly mathematical correlation models will be necessary, especially for community banks. Instead, select factors in your bank’s experience indicative of future losses. These may include:
   • External factors, such as GDP growth, unemployment rates, and housing prices
   • Internal factors such as delinquency rates, classified asset ratios, and the percentage of loans in the portfolio for which certain policy exceptions (e.g., loan-to-value ratio or minimum credit score) were granted
      
3. Once you select this set of drivers, find an historical loss period — a period of years corresponding to the estimated remaining life of the portfolio in question — where the historical drivers best approximate those you’re expecting in the future, based on your forecasts. For that historical loss period, determine the lifetime remaining loss rates of the loans outstanding at the beginning of that period, broken down by the number of years remaining until payoff. (This may require significant data mining, especially if that historical loss period was quite a few years ago.
    
4. Apply those loss rates to the breakdown derived in (a) above, by years remaining until maturity.

   Step Two: Adjustments to Historical Loss Rates

   The CECL model requires we adjust historical loss factors for conditions that may not be adequately captured by the historical loss period analysis we’ve just described. Let’s say a particular geographical subset of your market area is significantly affected by the economic fortunes of a large employer in that area.  Based on economic trends or recent developments, you might expect that employer to have a particularly bright – or dim – future over the forecast period; accordingly, you forecast loans to borrowers in that area will have losses that differ significantly from the rest of the portfolio.

   The approach for these loans is the same as in the previous step. However:

   These loans would be segregated from the remainder of the portfolio, which would be subject to the general approach in step one. As you think through this approach, there are myriad variations and many decisions to make, such as:

   Our intent in describing this methodology is to help your CECL implementation team start the dialogue in terms of converting theoretical concepts in the CECL model to actual loans and historical experience.

   To facilitate that discussion, we’ve included a very simple example here that illustrates the steps described above. Analyzing an entire loan portfolio under the CECL model is an exponentially more complex process, but the concepts are the same — forecasting future conditions, and establishing an ALLL based on the bank’s (or, when necessary, peers’) lifetime loan loss experience under similar historical conditions.

   Given the amount of number crunching and analysis necessary, and the potentially significant increase in the ALLL that may result from a lifetime-of-loan loss model, it’s safe to say the time to start is now! If you have any questions about CECL implementation, please contact Tracy Harding or Rob Smalley.

   Other resources
   For more information on CECL, check out our other blogs:

   CECL: Where to Start
   CECL: Bank and Branch Acquisitions
   CECL: Reasonable and Supportable

   To sign up to receive notification of our next CECL update, click here.

   • In substep (c), you would focus on forecasted conditions (such as unemployment rate and changes in real estate values) in the geographical area in which the significant employer is located.
   • You would then select an historical loss period that had actual conditions for that area that best correspond to those you’ve just forecasted.
   • In substep (d), you would determine the lifetime remaining loss rates of loans outstanding at the beginning of that period.
   • In substep (e), you would apply those rates to loans in that geographic area.
   • How to break down the portfolio
   • Which conditions to analyze
   • How to analyze the conditions for correlation with historical loss periods
   • Which resulting loss factors to apply to which loans

Recently, federal banking regulators released an interagency financial institution letter on CECL, in the form of a Q&A. Read it here. While there weren’t a lot of new insights into expectations examiners may have upon adoption, here is what we gleaned, and what you need to know, from the letter.

ALLL Documentation: More is better

Your management will be required to develop reasonable and supportable forecasts to determine an appropriate estimate for their allowance for loan and lease losses (ALLL). Institutions have always worked under the rule that accounting estimates need to be supported by evidence. Everyone knows both examiners and auditors LOVE documentation, but how much is necessary to prove whether the new CECL estimate is reasonable and supportable? The best answer I can give you is “more”.

And regardless of the exact model institutions develop, there will be significantly more decision points required with CECL than with the incurred loss model. At each point, both your management and your auditors will need to ask, “Why this path vs. another?” Defining those decision points and developing a process for documenting the path taken while also exploring alternatives is essential to build a model that estimates losses under both the letter and the spirit of the new rules. This is especially true when developing forecasts. We know you are not fortune tellers. Neither are we.

The challenge will be to document the sources used for forecasts, making the connections between that information and its effect on your loss data as clear as possible, so the model bases the loss estimate on your institution’s historical experience under conditions similar to those you’re forecasting, to the extent possible.

Software may make this easier… or harder.               

The leading allowance software applications allow for virtually instantaneous switching between different models, permitting users to test various assumptions in a painless environment. These applications feature collection points that enable users to document the basis for their decisions that become part of the final ALLL package. Take care to try and ensure that the support collected matches the decisions made and assumptions used.

Whether you use software or not there is a common set of essential controls to help ensure your ALLL calculation is supported. They are:

• Documented review and recalculation of the ALLL estimate by a qualified individual(s) independent of the preparation of the calculation
• Control over reports and spreadsheets that include data that feed into the overall calculation
• Documentation supporting qualitative factors, including reasonableness of the resulting reserve amounts
• Controls over loan ratings if they are a factor in your model
• Controls over the timeliness of charge-offs

In the process of implementing the new CECL guidance it can be easy to focus all of your effort on the details of creating models, collecting data and getting to a reasonable number. Based on the regulators’ new Q&A document, you’ll also want to spend some time making sure the ALLL number is supportable.  

Next time, we’ll look at a lesser known section of the CECL guidance that could have a significantly negative impact on the size of the ALLL and capital as a result: off-balance-sheet credit exposures.

By now, pretty much everyone in the banking industry has heard plenty of talk about CECL – the forthcoming “Current Expected Credit Loss” model of accounting for an institution’s allowance for loan losses (ALL). While the previous “Incurred Loss” model has been problematic to implement conceptually, and most of us thought CECL would improve ALL accounting and make it more comparable to how banks account for other debt instruments, it’s beginning to feel a bit like the dog who caught the car – now that we have this model, how the heck do we implement it?

The good news: We have a number of years before CECL’s effective date, and thus have some time to better understand the new rules and how to adapt an institution’s ALL model to reflect them. The bad news – the banking regulators recently announced they want banks to get cracking on this, and will expect to see some progress when they visit during upcoming exams – maybe not immediately, but likely at some point during the 2017 exam cycle.

This is the third in a series of articles addressing various aspects of this complex pronouncement. We hope that they provide you with practical advice that can help you get started on the nuts and bolts of CECL implementation.

Our previous article offered pointers on building the CECL team, brainstorming the process, and starting the data gathering conversation. In this article, we look at how to implement CECL when acquiring another bank, one or more branches of another bank, or simply a loan portfolio, such as a group of auto or credit card loans.

First, let’s remember the basics

The basic premise of CECL is that lifetime expected losses are to be booked at origination (or, in the case of an acquisition, at the acquisition date). You’ve likely heard some gnashing of teeth over the fact that this means losses are recorded “on Day One”, which many of us have some degree of conceptual difficulty with: For example, a higher risk loan will likely carry a higher yield at origination, so booking a higher level of expected losses on Day One (through the ALL) and the offsetting higher yield over the loan term (through interest income) feels like a mismatch between income and expense.

The Financial Accounting Standards Board (FASB) was sympathetic to this point, and spent a lot of time pondering it. Its international equivalent, the International Accounting Standards Board (IASB), which establishes – you guessed it – international accounting standards, actually tackled this issue by precluding Day One losses, unless they were expected to materialize within one year of origination (Day 365 losses?).

This approach, however, has led to a fairly convoluted – and challenging – model, which is already drawing a fair amount of criticism in the international community. In the end, although they had hoped to have a “converged” standard that would result in the same approach for U.S. and international institutions, FASB and the IASB decided to part company and use different models.

The short answer? We have to accept the notion of Day One losses as the price to pay for a less convoluted (but still complex to implement) model. This becomes important to remember as we look at accounting for acquisitions.

Accounting for acquisitions

Whether you’re acquiring a pool of loans, a branch, or an entire institution, the basic accounting under CECL is the same, and it’s the same (with a twist) as the accounting for originated loans: an ALL should be established for the purchase price allocated to the loans, and that ALL should reflect management’s estimate of the lifetime losses in the acquired portfolio.

Before we get into the details of how to do this, let’s take a moment to celebrate. Prior to CECL, it was not permissible to establish an initial ALL for acquired loans. Many bankers – and investors – complained that this made it difficult to compare one bank to another on metrics such as ALL coverage ratios. If one bank had a strategy that included acquisitions, and another didn’t, their ALLs would likely be quite different even if their loan portfolios and estimated incurred losses were similar. Now, with the CECL model, these two banks’ financial statements are much easier to compare.

As noted above, an ALL should be established for these loans under CECL, using the same methodology you would use for originated loans. The twist relates to what to do with the other side of the entry. The solution:

• For loans with a more-than-insignificant amount of credit deterioration since origination, the offset is to add this amount to the amount originally recorded for the purchase price allocated to the loans.

• For the rest of the acquired portfolio, the offset is to loan loss expense. That’s right, your provision is increased by the amount of ALL recorded in the transaction, except as noted in the previous bullet.

Why is this so? FASB is apparently assuming that:

• Buyers adjust the purchase price for the first item above. These loans, which we used to call “purchased – credit impaired (PCI)”, and now will call “purchased – credit deteriorated (PCD)” under CECL, are the loans with hair on them. They probably got some extra scrutiny during due diligence, thus theoretically depressing the purchase price a bit. Therefore, the amount of the purchase price allocated to loans is a lower number, and offsetting the establishment of the ALL by adding that amount to the purchase price assigned to the loans properly “grosses up” the recorded loan balance.

• Buyers don’t adjust the purchase price for other loans. This is probably true, as the lifetime losses on loans that aren’t PCD are just the cost of doing business for financial institutions. Therefore, as it is with originated loans, a big Day One provision is booked at closing.

It should be noted that the extent to which the definition of PCD loans differs from the previous definition of PCI loans depends on your interpretation of the old PCI definition. It appears clear that the new definition of PCD loans refers to loans that have specific indicators of significant credit deterioration since origination.

Let’s look at an example:

A bank buys three branches from another bank, which have total loans with a principal balance of $20 million and a fair value of $20,100,000. The portfolio includes loans with a principal balance of $1 million, and a fair value of $910,000, that are PCD.

The buyer bank determines the ALL under CECL would be $100,000 for the PCD loans and $475,000 for the rest of the acquired portfolio. Thus, the buyer bank records an ALL of $575,000. What’s the offset? As noted above:

• For the PCD loans, the offsetting $100,000 will be added to the $910,000 of purchase price allocated to those loans. As a result, these loans will have a gross amount allocated of $910,000 plus $100,000, or $1,010,000, which will then be reduced by an ALL of $100,000 on the balance sheet, for a net reported amount of $910,000 (their fair value). The difference between the gross amount assigned ($1,010,000) and the principal balance ($1 million), or $10,000, represents an implied adjustment to reflect current market interest rates, and is therefore amortized over the expected loan term through interest income.

• For the rest, the offsetting $475,000 will be an increase to the provision for loan losses, and will thus reduce income.

The last number could be a big one for institutions that do large or frequent acquisitions; thus, their balance sheets may be more comparable to other banks, but their income statements in the year of acquisition won’t be! The good news – like other acquisition costs such as legal fees and conversion expenses, this amount will be separately disclosed, so a reader can adjust for it if they believe it’s appropriate to do so.

Next time, we’ll look at the nuts and bolts of CECL’s concept of “reasonable and supportable” by considering proper documentation and controls over the ALL.

By now you have heard that the Financial Accounting Standards Board’s (FASB) answer to the criticism the incurred-loss model for accounting for the allowance for loan and lease losses faced during the financial crisis has been released in its final form. The Current Expected Credit Loss model (CECL), which was developed through an arduous (and sometimes contentious) process following the crisis, will bring substantial changes to the way community banks account for expected losses in their loan portfolios. 

Working closely with community banks in the years building up to final issuance, we recognized an uncomfortable level of uncertainty created by the ever-changing proposals and lack of concrete examples. Now that the guidance is final, we feel a strong sense of responsibility to provide our interpretations, thoughts and insights where we can. As the FASB has shown recently with its new revenue pronouncement, there is a good chance that updates to the guidance will occur as we move closer to the implementation dates. The banking regulators who have thus far been mostly silent on the guidance will also have their interpretations.

We find that with substantial new guidance breaking it down into bite size pieces can be the best approach to understanding and implementation. With that said, this is the first of a number of planned articles from BerryDunn to do just that.

Building your team

One of the first things your institution should do is create an implementation team. Building it now with staff from diverse backgrounds and experience including finance, lending and collections will bring significant rewards in the long run. This is also a good time to consider opportunities to include your auditor in the process. Ultimately, you will need them to perform audit procedures on your CECL allowance as part of your financial statement audit. That also means your model and the resulting estimate must be auditable. Including auditors in the early stages should also help your team think about implications the audit requirements may have for expectations related to retaining documentation and supporting assumptions. In addition, your auditor may be able to share observations based on how other institutions are implementing CECL that may be helpful for your team.  Auditors can do all this while maintaining independence if their services are structured properly.

When your team is assembled and is up-to-speed on the basics of what CECL is and isn’t, defining the team’s goals and creating a roadmap to get there will be your keys to success. And asking the right questions while creating the roadmap is a great place to start. 

Questions to consider:

What available method (under CECL) is the best fit for the institution?
We expect that largely most community institutions will start with a top-down approach using an adaption from their current loss-rate approach to reflect the change from the old incurred loss method to the “life of the loan” current expected credit loss method. We believe the following step-by-step model will be one practical approach that should fit most community banks and credit unions:

1. Determine which loans for specific reserves are appropriate, much in the same manner as you’re likely doing now. The notion of “impaired” loans goes away with CECL; a loan should be evaluated specifically if the institution becomes aware of loan-specific information indicating it has an exposure to loss that differs from other loans it’s been pooled with. In practice, we think that’ll be largely the same loans that are currently being identified as impaired.
2. Secondly, for the rest of the portfolio:
   1. Group loans by common characteristics – same as you are likely doing now. These groups can match your portfolio or class groupings used now in financial reporting, but can also be broken down further.
   2. For each group, create subgroups for each origination year. One of the disclosure requirements in the guidance suggests the current year and previous four years are the critical ones to focus on; anything older than five years could be combined together.
   3. For each subgroup:
      1. Establish economic and other relevant conditions for the average remaining term of loans in the subgroup. This will be a combination of forecasted conditions for the near future, probably based on the Fed’s three-year forecast, and long-term historical conditions for the remaining average loan term.
      2. Select an historical loss period that best approximates the conditions established in 2c(i).
      3. Determine average remaining lifetime losses for the historical loss period established in 2c(ii) for that loan type.
      4. Adjust the average determined in 2c(iii) for any current or expected conditions that you believe are different from this historical data. The regulators have indicated their expectation that these will likely be the types of items for which qualitative factors have been developed under the incurred loss model, or a subset thereof.

These adjustments should themselves be based on historical data, or peer historical data if institution-specific data isn’t available (for example, a new loan product); for example, a 25 basis point upward adjustment for actual and expected declines in real estate values beyond the average in the historical period in 2c(ii) should be supported by data that shows a 25 basis point increase in losses for this type of loan in previous periods in which real estate values had shown a similar decline.

What data do we need to start collecting?
The clock has started! The CECL model requires analysis of loss rates and environmental factors. Detailed loss-rate calculations for as far back as you can get is your goal. The next step after collecting the historical data on your losses is to document other factors that were in play during each period. You will also need to consider the factors that affected charge-off rates for different periods. Changes in overall economic conditions, underwriting (both risk and quality), the legal environment and other factors need to be documented and correlated to trends in charge-offs. Remember one of the first steps in preparing a CECL model is to decide which time period of losses best matches the current environment. Without considering the full picture, including the external forces in play, it will be impossible to select an appropriate time period.

How do we retain and access that data?
Many core providers restrict access to older loan level data, and in some cases historical information is readily available only for very short time periods. Knowing the restrictions on your older data will be key in planning for CECL. The model suggests that a starting point for considering historical data needs is to consider what time periods matter. This may vary for different types of loans.

Some core providers have started reaching out to their institutions to discuss CECL and options for collection of data through webinars and one-on-one meetings. Consider reaching out directly to your provider to see what options in terms of data collection, retention and reporting will be available to your team.

What is the next step?
Build a simple model so that your team can better grasp and discuss the fundamentals of CECL. This can serve to solidify the concept of “life of loan losses” vs. the incurred loss method, as well as get your task force focused on what is important in collecting data.

Now that you’ve got your team assembled and have begun to tackle these questions, it’s time to look at other factors to consider. In our next installment, we’ll take you through how to implement CECL for loans obtained in a merger or acquisition. In the meantime, please call us if you have any questions.