Skip to Main Content

insightsarticles

403(b) plan sponsors face 2026 Cycle 2 restatement deadline

By: David Stone,

Mark Deters is the Managing Director - Retirement Solutions at Creative Planning Retirement Services. He consults with plan sponsors to help them understand how they can design a stronger retirement program on behalf of their plan’s participants, fiduciaries, and supporting staff. Having worked as a third-party administrator, recordkeeper, and fiduciary advisor, Mark brings a wealth of knowledge to advising his clients. As a fiduciary, Mark’s primary obligation is to look out for the best interests of plan participants and their beneficiaries.

Mark Deters
09.15.26 /

Who this applies to: CFOs, controllers, finance directors, HR directors, benefits administrators, and plan administrators at employers that sponsor 403(b) plans using pre-approved documents.

The IRS has established a critical compliance deadline for 403(b) plan sponsors: all pre-approved 403(b) plan documents must be restated under Cycle 2 no later than December 31, 2026. Failure to meet this deadline could jeopardize a plan’s tax-advantaged status—creating significant operational, financial, and fiduciary risk. 

While the requirement itself is not new, many plan sponsors have not yet begun the restatement process. As year-end approaches, capacity constraints at document providers, recordkeepers, and advisors may create bottlenecks. Acting now will help ensure timely compliance and avoid last-minute complications.

Why the Cycle 2 restatement matters 

The IRS requires periodic restatements of pre-approved 403(b) plans to incorporate: 

  • Legislative and regulatory changes 
  • IRS guidance issued since the prior cycle 
  • Updates to plan language and operational requirements 

The Cycle 2 restatement reflects changes since the first remedial amendment cycle for 403(b) plans, including updates related to hardship distributions, loan rules, and required minimum distributions, among others. 

Importantly, this restatement is not optional—it is a condition of maintaining the plan’s qualified status under Internal Revenue Code Section 403(b).

Who is affected?

This requirement applies to employers sponsoring 403(b) plans that use pre-approved plan documents, including: 

  • Public schools and educational organizations 
  • Tax-exempt organizations under IRC Section 501(c)(3) 
  • Certain ministers and church-related organizations (depending on document structure) 

If your plan is individually designed, different rules may apply—but most 403(b) plans today utilize pre-approved document formats. 

Key action steps for plan sponsors

To help ensure compliance ahead of the December 31, 2026 deadline, we recommend the following steps:

1. Confirm your plan document type 

Determine whether your 403(b) plan uses a pre-approved document (vs. individually designed). 

  • If you are unsure, consult with your recordkeeper, third-party administrator (TPA), or ERISA counsel. 
  • This step is critical, as the Cycle 2 requirement specifically applies to pre-approved plans. 

2. Review the Cycle 2 restated document 

Once your provider issues the updated plan document: 

  • Review the restated provisions carefully. 
  • Pay close attention to operational changes that may affect plan administration or participant eligibility. 
  • Coordinate with your advisor to understand any new responsibilities or compliance considerations. 

3. Adopt the restated plan by December 31, 2026 

Formal adoption must occur by the IRS deadline: 

  • Execution typically requires an authorized employer representative. 
  • Late adoption may require correction under the IRS Employee Plans Compliance Resolution System (EPCRS), which can involve additional cost and administrative burden. 

4. Retain the executed document 

Maintain a fully signed copy of the restated plan document: 

  • Store it with your permanent plan records in your ERISA file
  • Ensure it is accessible for auditors, regulators, or internal governance reviews. 

5. Distribute an updated Summary Plan Description (SPD) 

An updated SPD reflecting the restated plan provisions: 

  • Must be provided to participants within 210 days following plan adoption.
  • Should clearly communicate plan terms in a participant-friendly format.

6. Communicate material changes 

If the restatement introduces material changes impacting participant rights or benefits: 

  • Provide clear and timely communication to participants. 
  • Consider targeted messaging to affected populations. 
  • Align communications with fiduciary best practices for transparency. 

Avoiding year-end capacity constraints 

A key practical consideration for 2026 is vendor capacity. Historically, plan sponsors that wait until the fourth quarter to begin restatement: 

  • Experience delays in receiving documents 
  • Encounter limited availability from TPAs and advisors 
  • Risk missing the adoption deadline 

Starting the process early allows for: 

  • Thorough document review 
  • Adequate time for internal approvals 
  • Proper coordination of participant communications 

Fiduciary considerations 

From a fiduciary perspective, timely compliance with the Cycle 2 restatement requirement is part of maintaining prudent plan governance. Failure to act could result in: 

  • Plan disqualification risk 
  • Increased scrutiny during audits 
  • Operational failures requiring correction 

Proactive planning, documentation, and communication demonstrate sound fiduciary oversight and help protect both the plan sponsor and participants. 

Plan sponsors should act now

The Cycle 2 restatement deadline of December 31, 2026 is fast approaching. While the process is manageable, it requires coordination and timely action. Plan sponsors should act now to confirm their document status, engage their service providers, and begin the review and adoption process well in advance of year-end.

Key takeaways

  • Confirm whether your 403(b) plan uses a pre-approved document, because the Cycle 2 restatement requirement applies specifically to pre-approved plans. 
  • Adopt the restated 403(b) plan document by December 31, 2026, to help maintain the plan’s tax-advantaged status. 
  • Review the updated plan provisions for changes that may affect plan administration, participant eligibility, or compliance responsibilities. 
  • Retain the fully executed restated plan document with permanent plan records, so it is available for audits, regulators, or governance reviews. 
  • Communicate updated plan terms and any material changes to participants within the required time frame.

Need help or have questions? Reach out to your BerryDunn or Creative Planning Retirement Services teams. 

Related Industries

Related Services

Consulting

Business Advisory

Related Professionals

Leaders

BerryDunn experts and consultants

The IRS announced plans to conduct examinations of the universal availability requirements for 403(b) plans (Plans) this summer. Noncompliance with these requirements results in operational errors for Plans―ultimately requiring correction. Plan sponsors should review their Plans for proper inclusion and exclusion of employees. Such review can help you avoid costly penalties if the IRS does conduct an examination and uncovers an issue with the Plan’s implementation of universal availability.

Universal availability requires that, if you permit one employee to make elective deferrals into a 403(b) plan, then all other employees must receive the same opportunity. There are a few exceptions to this rule. Plan sponsors may exclude employees who meet one of the following exceptions:

  • Employees who will contribute $200 annually or less
  • Employees eligible to participate in a § 401(k), 457(b), or other 403(b) plan of the same employer
  • Employees who normally work less than 20 hours per week (the equivalent of less than 1,000 hours in a year)
  • Students performing services described in Internal Revenue Code § 3121(b)(10)

Of these exceptions, errors in applying the universal availability requirements are typically found with the less than 20 hours per week exception. Even if an employee works less than 20 hours per week (essentially a part-time employee), if this employee works 1,000 hours or more, you must allow this employee to make elective deferrals into the Plan. Further, you can’t revoke this permission in subsequent years―once the employee meets the 1,000 hour requirement, they are no longer included in the less than 20 hours per week employee class.

We recommend Plan sponsors review their Plan documents to ensure they are appropriately applying elected eligibility provisions. Further, we recommend Plan sponsors annually review an employee census to ensure those exceptions (listed above) remain appropriate for any employees excluded from the Plan. For instance, if you note that an employee worked 1,000 hours during the year, who was being excluded as part of the “less than 20 hours per week” category, you should ensure you notify this employee of their eligibility to participate in the Plan. In addition, you should retain documentation regarding the employee’s deferral election or election to opt out of the Plan. Such practices will help ensure, if your Plan is selected for IRS examination, it passes with no issues.

For more information: https://www.irs.gov/retirement-plans/403b-plan-fix-it-guide-you-didnt-give-all-employees-of-the-organization-the-opportunity-to-make-a-salary-deferral
 

Article
Not the summer of love: IRS universal availability examinations

LIBOR is leaving—is your financial institution ready to make the most of it?

In July 2017, the UK’s Financial Conduct Authority announced the phasing out of the London Interbank Offered Rate, commonly known as LIBOR, by the end of 20211. With less than two years to go, US federal regulators are urging financial institutions to start assessing their LIBOR exposure and planning their transition. Here we offer some general impacts of the phasing out, some specific actions your institution can take to prepare, and, finally, background on how we got here (see Background at right).

How will the phase-out impact financial institutions?

The Federal Reserve estimates roughly $200 trillion in LIBOR-indexed notional value transactions in the cash and derivatives market2. LIBOR is used to help price a variety of financial services products,  including $3.4 trillion in business loans and $1.3 trillion in consumer loans, as well as derivatives, swaps, and other credit instruments. Even excluding loans and financial instruments set to mature before 2021—estimated by the FDIC at 82% of the above $200 trillion—LIBOR exposure is still significant3.

A financial institution’s ability to lend money is largely dependent on the relative stability of its capital position, or lack thereof. For institutions with a significant amount of LIBOR-indexed assets and liabilities, that means less certainty in expected future cash flows and a less stable capital position, which could prompt institutions to deny loans they might otherwise have approved. A change in expected cash flows could also have several indirect consequences. Criticized assets, assessed for impairment based on their expected future cash flows, could require a specific reserve due to lower present value of expected future cash flows.

The importance of fallback language in loan agreements

Fallback language in loan agreements plays a pivotal role in financial institutions’ ability to manage their LIBOR-related financial results. Most loan agreements include language that provides guidance for determining an alternate reference rate to “fall back” on in the event the loan’s original reference rate is discontinued. However, if this language is non-existent, contains fallbacks that are no longer adequate, or lacks certain key provisions, it can create unexpected issues when it comes time for financial institutions to reprice their LIBOR loans. Here are some examples:

  • Non-existent or inadequate fallbacks
    According to the Alternative Reference Rates Committee, a group of private-market participants convened by the Federal Reserve to help ensure a successful LIBOR transition, "Most contracts referencing LIBOR do not appear to have envisioned a permanent or indefinite cessation of LIBOR and have fallbacks that would not be economically appropriate"4.

    For instance, industry regulators have warned that without updated fallback language, the discontinuation of LIBOR could prompt some variable-rate loans to become fixed-rate2, causing unanticipated changes in interest rate risk for financial institutions. In a declining rate environment, this may prove beneficial as loans at variable rates become fixed. But in a rising rate environment, the resulting shrink in net interest margins would have a direct and adverse impact on the bottom line.

  • No spread adjustment
    Once LIBOR is discontinued, LIBOR-indexed loans will need to be repriced at a new reference rate, which could be well above or below LIBOR. If loan agreements don’t provide for an adjustment of the spread between LIBOR and the new rate, that could prompt unexpected changes in the financial position of both borrowers and lenders3. Take, for instance, a loan made at the Secured Overnight Financing Rate (SOFR), generally considered the likely replacement for USD LIBOR. Since SOFR tends to be lower than three-month LIBOR, a loan agreement using it that does not allow for a spread adjustment would generate lower loan payments for the borrower, which means less interest income for the lender.

    Not allowing for a spread adjustment on reference rates lower than LIBOR could also cause a change in expected prepayments—say, for instance, if borrowers with fixed-rate loans decide to refinance at adjustable rates—which would impact post-CECL allowance calculations like the weighted-average remaining maturity (WARM) method, which uses estimated prepayments as an input.

What can your financial institution do to prepare?

The Federal Reserve and the SEC have urged financial institutions to immediately evaluate their LIBOR exposure and expedite their transition. Though the FDIC has expressed no intent to examine financial institutions for the status of LIBOR planning or critique loans based on use of LIBOR3, Federal Reserve supervisory teams have been including LIBOR transitions in their regular monitoring of large financial institutions5. The SEC has also encouraged companies to provide investors with robust disclosures regarding their LIBOR transition, which may include a notional value of LIBOR exposure2.

Financial institutions should start by analyzing their LIBOR exposure beyond 2021. If you don’t expect significant exposure, further analysis may be unnecessary. However, if you do expect significant future LIBOR exposure, your institution should conduct stress testing using LIBOR as an isolated variable by running hypothetical transition scenarios and assessing the potential financial impact.

Closely examine and assess fallback language in loan agreements. For existing loan agreements, you may need to make amendments, which could require consent from counterparties2. For new loan agreements maturing beyond 2021, lenders should consider selecting an alternate reference rate. New contract language for financial instruments and residential mortgages is currently being drafted by the International Securities Dealers Association and the Federal Housing Finance Authority, respectively3—both of which may prove helpful in updating loan agreements.

Lenders should also consider their underwriting policies. Loan underwriters will need to adjust the spread on new loans to accurately reflect the price of risk, because volatility and market tendencies of alternate loan reference rates may not mirror LIBOR’s. What’s more, SOFR lacks abundant historical data for use in analyzing volatility and market tendencies, making accurate loan pricing more difficult.

Conclusion: Start assessing your LIBOR risk soon

The cessation of LIBOR brings challenges and opportunities that will require in-depth analysis and making difficult decisions. Financial institutions and consumers should heed the advice of regulators and start assessing their LIBOR risk now. Those that do will not only be better prepared―but also better positioned―to capitalize on the opportunities it presents.

Need help assessing your LIBOR risk and preparing to transition? Contact BerryDunn’s financial services specialists.

1 https://www.washingtonpost.com/business/2017/07/27/acdd411c-72bc-11e7-8c17-533c52b2f014_story.html?utm_term=.856137e72385
2 Thomson Reuters Checkpoint Newsstand April 10, 2019
3 https://www.fdic.gov/regulations/examinations/supervisory/insights/siwin18/si-winter-2018.pdf
4 https://bankingjournal.aba.com/2019/04/libor-transition-panel-recommends-fallback-language-for-key-instruments/
5 https://www.reuters.com/article/us-usa-fed-libor/fed-urges-u-s-financial-industry-to-accelerate-libor-transition-idUSKCN1RM25T

Article
When one loan rate closes, another opens

In auditing, the concept of professional skepticism is ubiquitous. Just as a Jedi in Star Wars is constantly trying to hone his understanding of the “force”, an auditor is constantly crafting his or her ability to apply professional skepticism. It is professional skepticism that provides the foundation for decision-making when conducting an attestation engagement.

A brief definition

The professional standards define professional skepticism as “an attitude that includes a questioning mind, being alert to conditions that may indicate possible misstatement due to fraud or error, and a critical assessment of audit evidence.” Given this definition, one quickly realizes that professional skepticism can’t be easily measured. Nor is it something that is cultivated overnight. It is a skill developed over time and a skill that auditors should constantly build and refine.

Recently, the extent to which professional skepticism is being employed has gained a lot of criticism. Specifically, regulatory bodies argue that auditors are not skeptical enough in carrying out their duties. However, as noted in the white paper titled Scepticism: The Practitioners’ Take, published by the Institute of Chartered Accountants in England and Wales, simply asking for more skepticism is not a practical solution to this issue, nor is it necessarily always desirable. There is an inevitable tug of war between professional skepticism and audit efficiency. The more skeptical the auditor, typically, the more time it takes to complete the audit.

Why does it matter? Audit quality.

First and foremost, how your auditor applies professional skepticism to your audit directly impacts the quality of their service. Applying an appropriate level of professional skepticism enhances the likelihood the auditor will understand your industry, lines of business, business processes, and any nuances that make your company different from others, as it naturally causes the auditor to ask questions that may otherwise go unasked.

These questions not only help the auditor appropriately apply professional standards, but also help the auditor gain a deeper understanding of your business. This will enable the auditor to provide insights and value-added services an auditor who doesn’t apply the right degree of skepticism may never identify.

Therefore, as the white paper notes, audit committees, management, and investors should be asking “How hard do our auditors get pushed on fees, and what effect does that have on the quality of the audit?” If your auditor is overly concerned with completing the audit within a fixed time budget, professional skepticism and, ultimately, the quality of the audit, may suffer.

Applying skepticism internally

By its definition, professional skepticism is a concept that specifically applies to auditors, and is not on point when it comes to other audit stakeholders. This is because the definition implies that the individual applying professional skepticism is independent from the information he or she is analyzing. Other audit stakeholders, such as members of management or the board of directors, are naturally advocates for the organizations they manage and direct and therefore can’t be considered independent, whereas an auditor is required to remain independent.

However, rather than audit stakeholders applying professional skepticism as such, these other stakeholders should apply an impartial and diligent mindset to their work and the information they review. This allows the audit stakeholder to remain an advocate for his or her organization, while applying critical skills similar to those applied in the exercise of professional skepticism. This nuanced distinction is necessary to maintain the limited scope to which the definition of professional skepticism applies: the auditor.

Specific to the financial statement reporting function, these stakeholders should be assessing the financial statements and ask questions that can help prevent or detect flaws in the financial reporting process. For example, when considering significant estimates, management should ask: are we considering all relevant information? Are our estimates unbiased? Are there alternative accounting treatments we haven’t considered? Can we justify our selected accounting treatment? Essentially, management should start by asking itself: what questions would we expect our auditor to ask us?

It is also important to be critical of your own work, and never become complacent. This may be the most difficult type of skepticism to apply, as most of us do not like to have our work criticized. However, critically reviewing one’s own work, essentially as an informal first level of review, will allow you to take a step back and consider it from a different vantage point, which may in turn help detect errors otherwise left unnoticed. Essentially, you should both consider evidence that supports the initial conclusion and evidence that may be contradictory to that conclusion.

The discussion in auditing circles about professional skepticism and how to appropriately apply it continues. It is a challenging notion that’s difficult to adequately articulate. Although it receives a lot of attention in the audit profession, it is a concept that, slightly altered, can be of value to other audit stakeholders. Doing so will help you create a stronger relationship with your auditor and, ultimately, improve the quality of the financial reporting process—and resulting outcome.

Article
Professional skepticism and why it matters to audit stakeholders

Benchmarking doesn’t need to be time and resource consuming. Read on for four simple steps you can take to improve efficiency and maximize resources.

Stop us if you’ve heard this one before (from your Board of Trustees or Finance Committee): “I wish there was a way we could benchmark ourselves against our competitors.”

Have you ever wrestled with how to benchmark? Or struggled to identify what the Board wants to measure? Organizations can fall short on implementing effective methods to benchmark accurately. The good news? With a planned approach, you can overcome traditional obstacles and create tools to increase efficiency, improve operations and reporting, and maintain and monitor a comfortable risk level. All of this can help create a competitive advantage — and it  isn’t as hard as you might think.

Even with a structured process, remember that benchmarking data has pitfalls, including:

  • Peer data can be difficult to find. Some industries are better than others at tracking this information. Some collect too much data that isn’t relevant, making it hard to find the data that is.
     
  • The data can be dated. By the time you close your books for the year and data is available, you’re at least six months into the next fiscal year. Knowing this, you can still build year-over-year trending models that you can measure consistently.
     
  • The underlying data may be tainted. As much as we’d like to rely on financial data from other organization and industry surveys, there’s no guarantee that all participants have applied accounting principles consistently, or calculated inputs (e.g., full-time equivalents) in the same way, making comparisons inaccurate.

Despite these pitfalls, benchmarking is a useful tool for your organization. Benchmarking lets you take stock of your current financial condition and risk profile, identify areas for improvement and find a realistic and measurable plan to strengthen your organization.

Here are four steps to take to start a successful benchmarking program and overcome these pitfalls:

  1. Benchmark against yourself. Use year-over-year and month-to-month data to identify trends, inconsistencies and unexplained changes. Once you have the information, you can see where you want to direct improvement efforts.
  2. Look to industry/peer data. We’d love to tell you that all financial statements and survey inputs are created equally, but we can’t. By understanding the source of your information, and the potential strengths and weaknesses in the data (e.g., too few peers, different size organizations and markets, etc.), you will better know how to use it. Understanding the data source allows you to weigh metrics that are more susceptible to inconsistencies.
  1. Identify what is important to your organization and focus on it. Remove data points that have little relevance for your organization. Trying to address too many measures is one of the primary reasons benchmarking fails. Identify key metrics you will target, and watch them over time. Remember, keeping it simple allows you to put resources where you need them most.
  1. Use the data as a tool to guide decisions. Identify aspects of the organization that lie beyond your risk tolerance and then define specific steps for improvement.

Once you take these steps, you can add other measurement strategies, including stress testing, monthly reporting, and use in budgeting and forecasting. By taking the time to create and use an effective methodology, this competitive advantage can be yours. Want to learn more? Check out our resources for not-for-profit organizations here.

Article
Benchmarking: Satisfy your board and gain a competitive advantage

Executive compensation, bonuses, and other cost structure items, such as rent, are often contentious issues in business valuations, as business valuations are often valued by reference to the income they produce. If the business being valued pays its employees an above-market rate, for example, its income will be depressed. Accordingly, if no adjustments are made, the value of the business will also be diminished.

When valuing controlling ownership interests, valuation analysts often restate above- or below-market items (compensation, bonuses, rent, etc.) to a fair market level to reflect what a hypothetical buyer would pay. In the valuation of companies with ESOPs, the issue gets more complicated. The following hypothetical example illustrates why.

Glamorous Grocery is a company that is 100% owned by an ESOP. A valuation analyst is retained to estimate the fair market value of each ESOP share. Glamorous Grocery generates very little income, in part because several executives are overcompensated. The valuation analyst normalizes executive compensation to a market level. This increases Glamorous Grocery’s income, and by extension the fair market value of Glamorous Grocery, ultimately resulting in a higher ESOP share value.

Glamorous Grocery’s trustee then uses this valuation to establish the market price of ESOP shares for the following year. When employees retire, Glamorous Grocery buys employees out at the established share price. The problem? As mentioned before, Glamorous Grocery generates very little income and as a result has difficulty obtaining the liquidity to buy out employees.

This simple example illustrates the concerns about normalizing executive compensation in ESOP valuations. If you reduce executive compensation for valuation purposes, the share price increases, putting a heavier burden on the company when you redeem shares. The company, which already has reduced income from paying above-market executive compensation, may struggle to redeem shares at the established price.

While control-level adjustments may be common, it is worth considering whether they are appropriate in an ESOP valuation. It is important that the benefit stream reflect the underlying economic reality of the company to ensure longevity of the company and the company’s ESOP.

Questions? Our valuation team will be happy to help. 

BerryDunn’s Business Valuation Group partners with clients to bring clarity to the complexities of business valuation, while adhering to strict development and reporting standards. We render an independent, objective opinion of your company’s value in a reporting format tailored to meet your needs. We thoroughly analyze the financial and operational performance of your company to understand the story behind the numbers. We assess current and forecasted market conditions as they impact present and future cash flows, which in turn drives value.

Article
Compensation, bonuses, and other factors that can make or break an Employee Stock Ownership Plan (ESOP)

Read this if your CFO has recently departed, or if you're looking for a replacement.

With the post-Covid labor shortage, “the Great Resignation,” an aging workforce, and ongoing staffing concerns, almost every industry is facing challenges in hiring talented staff. To address these challenges, many organizations are hiring temporary or interim help—even for C-suite positions such as Chief Financial Officers (CFOs).

You may be thinking, “The CFO is a key business partner in advising and collaborating with the CEO and developing a long-term strategy for the organization; why would I hire a contractor to fill this most-important role?” Hiring an interim CFO may be a good option to consider in certain circumstances. Here are three situations where temporary help might be the best solution for your organization.

Your organization has grown

If your company has grown since you created your finance department, or your controller isn’t ready or suited for a promotion, bringing on an interim CFO can be a natural next step in your company’s evolution, without having to make a long-term commitment. It can allow you to take the time and fully understand what you need from the role — and what kind of person is the best fit for your company’s future.

BerryDunn's Kathy Parker, leader of the Boston-based Outsourced Accounting group, has worked with many companies to help them through periods of transition. "As companies grow, many need team members at various skill levels, which requires more money to pay for multiple full-time roles," she shared. "Obtaining interim CFO services allows a company to access different skill levels while paying a fraction of the cost. As the company grows, they can always scale its resources; the beauty of this model is the flexibility."

If your company is looking for greater financial skill or advice to expand into a new market, or turn around an underperforming division, you may want to bring on an outsourced CFO with a specific set of objectives and timeline in mind. You can bring someone on board to develop growth strategies, make course corrections, bring in new financing, and update operational processes, without necessarily needing to keep those skills in the organization once they finish their assignment. Your company benefits from this very specific skill set without the expense of having a talented but expensive resource on your permanent payroll.

Your CFO has resigned

The best-laid succession plans often go astray. If that’s the case when your CFO departs, your organization may need to outsource the CFO function to fill the gap. When your company loses the leader of company-wide financial functions, you may need to find someone who can come in with those skills and get right to work. While they may need guidance and support on specifics to your company, they should be able to adapt quickly and keep financial operations running smoothly. Articulating short-term goals and setting deadlines for naming a new CFO can help lay the foundation for a successful engagement.

You don’t have the budget for a full-time CFO

If your company is the right size to have a part-time CFO, outsourcing CFO functions can be less expensive than bringing on a full-time in-house CFO. Depending on your operational and financial rhythms, you may need the CFO role full-time in parts of the year, and not in others. Initially, an interim CFO can bring a new perspective from a professional who is coming in with fresh eyes and experience outside of your company.

After the immediate need or initial crisis passes, you can review your options. Once the temporary CFO’s agreement expires, you can bring someone new in depending on your needs, or keep the contract CFO in place by extending their assignment.

Considerations for hiring an interim CFO

Making the decision between hiring someone full-time or bringing in temporary contract help can be difficult. Although it oversimplifies the decision a bit, a good rule of thumb is: the more strategic the role will be, the more important it is that you have a long-term person in the job. CFOs can have a wide range of duties, including, but not limited to:

  • Financial risk management, including planning and record-keeping
  • Management of compliance and regulatory requirements
  • Creating and monitoring reliable control systems
  • Debt and equity financing
  • Financial reporting to the Board of Directors

If the focus is primarily overseeing the financial functions of the organization and/or developing a skilled finance department, you can rely — at least initially — on a CFO for hire.

Regardless of what you choose to do, your decision will have an impact on the financial health of your organization — from avoiding finance department dissatisfaction or turnover to capitalizing on new market opportunities. Getting outside advice or a more objective view may be an important part of making the right choice for your company.

BerryDunn can help whether you need extra assistance in your office during peak times or interim leadership support during periods of transition. We offer the expertise of a fully staffed accounting department for short-term assignments or long-term engagements―so you can focus on your business. Meet our interim assistance experts.

Article
Three reasons to consider hiring an interim CFO

This article is the first in a series to help employee benefit plan fiduciaries better understand their responsibilities and manage the risks of non-compliance with ERISA requirements.

On Labor Day, 1974, President Gerald Ford signed the Employee Retirement Income Security Act, commonly known as ERISA, into law. Prior to ERISA, employee pensions had scant protections under the law, a problem made clear when the Studebaker automobile company closed its South Bend, Indiana production plant in 1963. Upon the plant’s closing, some 4,000 employees—whose average age was 52 and average length of service with the company was 23 years—received approximately 15 cents for each dollar of benefit they were owed. Nearly 3,000 additional employees, all of whom had less than 10 years of service with the company, received nothing.

A decade later, ERISA established statutory requirements to preserve and protect the rights of employees to their pensions upon retirement. Among other things, ERISA defines what a plan fiduciary is and sets standards for their conduct.

Who is—and who isn’t—a plan fiduciary?
ERISA defines a fiduciary as a person who:

  1. Exercises discretionary authority or control over the management of an employee benefit plan or the disposition of its assets,
  2. Gives investment advice about plan funds or property for a fee or compensation or has the authority to do so,
  3. Has discretionary authority or responsibility in plan administration, or
  4. Is designated by a named fiduciary to carry out fiduciary responsibility. (ERISA requires the naming of one or more fiduciaries to be responsible for managing the plan's administration, usually a plan administrator or administrative committee, though the plan administrator may engage others to perform some administrative duties).

If you’re still unsure about exactly who is and isn’t a plan fiduciary, don’t worry, you’re not alone. Disagreements over whether or not a person acting in a certain capacity and in a specific situation is a fiduciary have sometimes required legal proceedings to resolve them. Here are some real-world examples.

Employers who maintain employee benefit plans are typically considered fiduciaries by virtue of being named fiduciaries or by acting as a functional fiduciary. Accordingly, employer decisions on how to execute the intent of the plan are subject to ERISA’s fiduciary standards.

Similarly, based on case law, lawyers and consultants who effectually manage an employee benefit plan are also generally considered fiduciaries.

A person or company that performs purely administrative duties within the framework, rules, and procedures established by others is not a fiduciary. Examples of such duties include collecting contributions, maintaining participants' service and employment records, calculating benefits, processing claims, and preparing government reports and employee communications.

What are a fiduciary’s responsibilities?
ERISA requires fiduciaries to discharge their duties solely in the interest of plan participants and beneficiaries, and for the exclusive purpose of providing benefits for them and defraying reasonable plan administrative expenses. Specifically, fiduciaries must perform their duties as follows:

  1. With the care, skill, prudence, and diligence of a prudent person under the circumstances;
  2. In accordance with plan documents and instruments, insofar as they are consistent with the provisions of ERISA; and
  3. By diversifying plan investments so as to minimize risk of loss under the circumstances, unless it is clearly prudent not to do so.

A fiduciary is personally liable to the plan for losses resulting from a breach of their fiduciary responsibility, and must restore to the plan any profits realized on misuse of plan assets. Not only is a fiduciary liable for their own breaches, but also if they have knowledge of another fiduciary's breach and either conceals it or does not make reasonable efforts to remedy it.

ERISA provides for a mandatory civil penalty against a fiduciary who breaches a fiduciary responsibility under ERISA or commits a violation, or against any other person who knowingly participates in such breach or violation. That penalty is equal to 20 percent of the "applicable recovery amount" paid pursuant to any settlement agreement with ERISA or ordered by a court to be paid in a judicial proceeding instituted by ERISA.

ERISA also permits a civil action to be brought by a participant, beneficiary, or other fiduciary against a fiduciary for a breach of duty. ERISA allows participants to bring suit to recover losses from fiduciary breaches that impair the value of the plan assets held in their individual accounts, even if the financial solvency of the entire plan is not threatened by the alleged fiduciary breach. Courts may require other appropriate relief, including removal of the fiduciary.

Over the coming months, we’ll share a series of blogs for employee benefit plan fiduciaries, covering everything from common terminology to best practices for plan documentation, suggestions for navigating fiduciary risks, and more.

Article
What's in a name? A lot, if you manage a benefit plan.

Reading through the 133-page exposure draft for the Proposed Statement on Auditing Standards (SAS) Forming an Opinion and Reporting on Financial Statements of Employee Benefit Plans Subject to ERISA, issued back in April 2017, and then comparing it to the final 100+ page standard approved in September 2018, may not sound like a fun way to spend a Sunday morning sipping a coffee (or three), but I disagree.

Lucky for you, I have captured the highlights here. And it really is exciting. Our feedback was incorporated into the final standard both through written comments on the exposure draft and a voice via our firm’s Director of Quality Assurance, who holds a seat on the Auditing Standards Board.

"Limited scope" audits will no longer exist

The debate over the “limited scope” audit has been going on for years. The new standard is designed to help auditors clearly understand their responsibilities in performing an audit, and provide plan sponsors, plan participants, the Department of Labor (DOL), and other interested parties with more information about what auditors do in situations when audits are limited in scope by the plan’s management, which is permitted by DOL reporting and disclosure rules.

Once effective, Audit Committee and Board of Director meetings in which plan financial statements are presented will include more clarity into what an employee benefit plan audit entails, based on revisions to the auditor’s report. I know I would frequently kick off meetings covering the auditor’s report opinion by explaining what a “limited scope” audit was. As a “limited scope” audit will no longer exist, the revised auditor’s report language clearly articulates what the auditor is, and is not, opining on.

When is the new standard effective?

The effective date is “to be determined” as it will be aligned with the new overall auditor’s reporting standard once that is finalized, and the standard does not permit early adoption. So there is still time to educate and prepare all parties involved.

Probably the biggest conversation piece around the water cooler for the new standard is the lingo. The “limited scope” audit language will be going away and now the auditor’s report and all related language will refer to an “ERISA section 103(a)(3)(C)” audit. I know, it’s a mouthful?try and say that one three times fast!

The auditor's report will look much different

The auditor’s report under an ERISA section 103(a)(3)(C) audit will look significantly different from the old “limited scope” auditor’s report, once the standard is effective. There are several illustrative examples of reports included in the standard to refer to. One thing you will immediately notice?the auditor’s report is getting longer and not shorter. Some highlights:

The Opinion section will include two bullets that explicitly state, in basic summarized terms: (1) the certified information agrees to the financial statements, and (2)  the auditor’s opinion on everything else, which the auditor has audited.

Other Matter—Supplemental Schedules Required by ERISA section will include two bullets that explicitly state, in basic summarized terms, (1) the certified information agrees to the financial statements and (2) the auditor’s opinion on everything else, which the auditor has audited in relation to the financial statements. Sound similar to the Opinion section? Well, that’s because it is!).

Other key takeaways

  • Auditors will be required to make inquiries of management to gain assurance they performed procedures to determine the certifying institution is qualified for the ERISA section 103(a)(3)(C) audit, as it is management’s responsibility to make that determination.
  • Fair value disclosures included within the plan’s financial statements are also included under the certification umbrella and subject to the same audit procedures. As an auditor, if anything comes to our attention that does not meet expectations, we would further assess as necessary.
  • The auditor is required to obtain and read a draft Form 5500 prior to issuance of the auditor’s report.

The final standard also removed some highly debated provisions included in the draft proposal as follows:

  • There is no report on findings required, but the auditor is required to follow AU-C 250, AU-C 260 and AU-C 265. Should anything arise that warrants communication to those charged with governance, those findings must be communicated in writing. Be sure to grab another coffee and refresh yourself on AU-C 250, AU-C 260 and AU-C 265!
  • The new required procedures section for an audit was scrapped and replaced with an Appendix A for recommended audit procedures based on risk assessments. There are some great tools there to look at.
  • The required emphasis-of-matter section paragraph section of the auditor’s report was also scrapped.

Questions about the new employee benefit audit standard or employee benefit plan audits

At BerryDunn, we perform over 200 employee benefit plan audits each year. If you have any questions, we would love to help. And we’ll keep the acronyms to a minimum. Please reach out with any questions.

Article
Auditing standards board approves new employee benefit plan auditing standard: What you need to know