NASHP meets the Emerald City

There’s a good chance that your organization is in the position of needing to do more with less under the strain of staffing constraints and competing initiatives. With fewer resources to work with, you’ll need to be persuasive to get the green light on new enterprise technology initiatives. To do that, you need to present decision makers with well-thought-out and targeted business cases that show your initiative will have impact and will be successful. Yet developing such a business case is no walk in the park. Perhaps because our firm has its roots in New England, we sometimes compare this process to leading a hiking trip into the woods—into the wild. 

Just as in hiking, success in developing a business case for a new initiative boils down to planning, preparation, and applying a few key concepts we’ve learned from our travels. 

Consensus is critical when planning new technology initiatives

Before you can start the hike, everyone has to agree on some fundamentals: 

Who's going? 

Where are we going? 

When do we go and for how long? 

Getting everyone to agree requires clear communication and, yes, even a little salesmanship: “Trust me. The bears aren’t bad this time of year.” The same principle applies in proposing new technology initiatives; making sure everyone has bought into the basic framework of the initiative is critical to success.

Although many hiking trips involve groups of people similar in age, ability, and whereabouts, for your business initiative you need to communicate with diverse groups of colleagues at every level of the organization. Gaining consensus among people who bring a wide variety of skills and perspectives to the project can be complex.

To gain consensus, consider the intended audiences of your message and target the content to what will work for them. It should provide enough information for executive-level stakeholders to quickly understand the initiative and the path forward. It should give people responsible for implementation or who will provide specific skills substantive information to implement the plan. And remember: one of the most common reasons projects struggle to meet their stated objectives (and why some projects never materialize to begin with), is a lack of sponsorship and buy-in. The goal of a business case is to gain buy-in before project initiation, so your sponsors will actively support the project during implementation. 

Set clear goals for your enterprise technology project 

It’s refreshing to take the first steps, to feel that initial sense of freedom as you set off down the trail. Yet few people truly enjoy wandering around aimlessly in the wilderness for an extended period of time. Hikers need goals, like reaching a mountain peak or seeing famous landmarks, or hiking a predetermined number of miles per day. And having a trail guide is key in meeting those goals. 

For a new initiative, clearly define goals and objectives, as well as pain points your organization wishes to address. This is critical to ensuring that the project’s sponsors and implementation team are all on the same page. Identifying specific benefits of completing your initiative can help people keep their “eyes on the prize” when the project feels like an uphill climb.

Timelines provide additional detail and direction—and demonstrate to decision makers that you have considered multiple facets of the project, including any constraints, resource limitations, or scheduling conflicts. Identifying best practices to incorporate throughout the initiative enhances the value of a business case proposition, and positions the organization for success. By leveraging lessons learned on previous projects, and planning for and mitigating risk, the organization will begin to clear the path for a successful endeavor. 

Don’t compromise on the right equipment

Hiking can be an expensive, time-consuming hobby. While the quality of your equipment and the accuracy of your maps are crucial, you can do things with limited resources if you’re careful. Taking the time to research and purchase the right equipment, (like the right hiking boots), keeps your fun expedition from becoming a tortuous slog. 

Similarly, in developing a business case for a new initiative, you need to make sure that you identify the right resources in the right areas. We all live with resource constraints of one sort or another. The process of identifying resources, particularly for funding and staffing the project, will lead to fewer surprises down the path. As many government employees know all too well, it is better to be thorough in the budget planning process than to return to authorizing sources for additional funding while midstream in a project. 

Consider your possible outcomes

You cannot be too singularly focused in the wild; weather conditions change quickly, unexpected opportunities reveal themselves, and being able to adapt quickly is absolutely necessary in order for everyone to come home safely. Sometimes, you should take the trail less traveled, rest in the random lean-to that you and your group stumble upon, or go for a refreshing dip in a lake. By focusing on more than just one single objective, it often leads to more enjoyable, safe, and successful excursions.

This type of outlook is necessary to build a business case for a new initiative. You may need to step back during your initial planning and consider the full impact of the process, including on those outside your organization. For example, you may begin to identify ways in which the initiative could benefit both internal and external stakeholders, and plan to move forward in a slightly new direction. Let’s say you’re building a business case for a new land management and permitting software system. Take time to consider that this system may benefit citizens, contractors, and other organizations that interact with your department. This new perspective can help you strengthen your business case. 

Expect teamwork

A group that doesn’t practice teamwork won’t last long in the wild. In order to facilitate and promote teamwork, it’s important to recognize the skills and contributions of each and every person. Some have a better sense of direction, while some can more easily start campfires. And if you find yourself fortunate enough to be joined by a truly experienced hiker, make sure that you listen to what they have to say.

Doing the hard work to present a business case for a new initiative may feel like a solitary action at times, but it’s not. Most likely, there are other people in your organization who see the value in the initiative. Recognize and utilize their skills in your planning. We also suggest working with an experienced advisor who can leverage best practices and lessons learned from similar projects. Their experience will help you anticipate potential resistance and develop and articulate the mitigation strategies necessary to gain support for your initiative.

If you have thoughts, concerns, or questions, contact our team. We love to discuss the potential and pitfalls of new initiatives, and can help prepare you to head out into the wild. We’d love to hear any parallels with hiking and wilderness adventuring that you have as well. Let us know! 

BerryDunn’s local government consulting team has the experience to lead technology planning initiatives and develop actionable plans that help you think strategically and improve service delivery. We partner with you, maintaining flexibility and open lines of communication to help ensure that your team has the resources it needs.

Our team has broad and deep experience partnering with local government clients across the country to modernize technology-based business transformation projects and the decision-making and planning efforts. Our expertise includes software system assessments/planning/procurement and implementation project management; operational, management, and staffing assessments; information security; cost allocation studies; and data management.  

Read this if your organization is planning on upgrading or replacing an enterprise technology system.

It can be challenging and stressful to plan for technology initiatives, especially those that involve and impact every area of your organization. Common initiatives include software upgrades or replacements for:

• Financial management, such as Enterprise Resource Planning (ERP) systems
• Asset management systems
• Electronic health records (EHR) systems
• Permitting and inspections systems

Though the number of considerations when planning enterprise technology projects can be daunting, the greatest mistake you can make is not planning at all. By addressing just a few key areas, you can avoid some of the most common pitfalls, such as exceeding budget and schedule targets, experiencing scope creep, and losing buy-in among stakeholders. Here are some tips to help you navigate your next project:

Identify your IT project roles and resources

While most organizations understand the importance of identifying project stakeholder groups, it is often an afterthought. Defining these roles at the outset of your project helps you accurately estimate the work effort.

Your stakeholder groups may include:

• An executive sponsor
• A steering committee
• A project manager
• Functional leads
• A technical team

Once you’ve established the necessary roles, you can begin reviewing your organization’s resources to determine the people who will be available to fill them. Planning for resource availability will help you avoid delays, minimize impact to regular business processes, and reduce the likelihood of burnout. But this plan won’t remain static—you can expect to make updates throughout the project.

Establish clear goals and objectives to keep your technology project on track

It’s important that an enterprise technology project has established goals and objectives statements. These statements will help inform decision-making, provide benchmarks for progress, and measure your project’s success. They can then be referenced when key stakeholders have differing perspectives on the direction to take with a pending decision. For example, if the objective of your project is to reduce paper-based processes, you may plan for additional computer workstations and focus technical resources on provisioning them. You’ll also be able to measure your success in the reduction of paper-based tasks.

Estimate your IT project budget accurately

Project funding is hardly ever overlooked, but can be complex with project budgets that are either underestimated or estimated without sufficient rationale to withstand approval processes and subsequent budget analysis. You may find that breaking down estimates to a lower level of detail helps address these challenges. Most technology projects incur costs in three key areas:

• Vendor cost: This could include both one-time software implementation costs as well as recurring costs for maintenance and ongoing support.
• Infrastructure cost: Consider the cost of any investments needed to support your project, such as data center hardware, networking components, or computing devices.
• Supplemental resource cost: Don’t forget to include the cost of any additional resources needed for their specialized knowledge or to simply backfill project staff. This could include contracted resources or the additional cost of existing resources (i.e., overtime).

A good technology project budget also includes a contingency amount. This amount will depend on your organization’s standards, the relative level of confidence in your estimates, and the relative risk.

Anticipate the need for change management

Depending on the project, staff in many areas of your organization will be impacted by some level of change during a technology implementation. External stakeholders, such as vendors and the public, may also be affected. You can effectively manage this change by proactively identifying areas of likely change resistance and creating strategies to address them.

In any technology implementation, you will encounter change resistance you did not predict. Having strategies in place will help you react quickly and effectively. Some proven change management strategies include communicating throughout your project, involving stakeholders to get their buy-in, and helping ensure management has the right amount of information to share with their employees.

Maintain focus and stay flexible as you manage your IT project

Even with the most thought-out planning, unforeseen events and external factors may impact your technology project. Establish mechanisms to regularly and proactively monitor project status so that you can address material risks and issues before their impact to the project grows. Reacting to these items as they arise requires key project stakeholders to be flexible. Key stakeholders must recognize that new information does not necessarily mean previous decisions were made in error, and that it is better to adapt than to stick to the initial direction.

Whether you’re implementing an ERP, an EHR, or enterprise human resources or asset management systems, any enterprise technology project is a massive undertaking, involving significant investment and a coordinated effort with individuals across multiple areas of an organization. Common mistakes can be costly, but having a structured approach to your planning can help avoid pitfalls. Our experienced, objective advisors have worked with public and private organizations across the country to oversee large enterprise projects from inception to successful completion.

Contact our software consulting team with any questions.

Read this if your company is considering outsourced information technology services.

For management, it’s the perennial question: Keep things in-house or outsource?

For management, it’s the perennial question: Keep things in-house or outsource? Most companies or organizations have outsourcing opportunities, from revenue cycle to payment processing to IT security. When deciding whether to outsource, you weigh the trade-offs and benefits by considering variables such as cost, internal expertise, cross coverage, and organizational risk.

In IT services, outsourcing may win out as technology becomes more complex. Maintaining expertise and depth for all the IT components in an environment can be resource-intensive.

Outsourced solutions allow IT teams to shift some of their focus from maintaining infrastructure to getting more value out of existing systems, increasing data analytics, and better linking technology to business objectives. The same can be applied to revenue cycle outsourcing, shifting the focus from getting clean bills out and cash coming in, to looking at the financial health of the organization, analyzing service lines, patient experience, or advancing projects.  

Once you’ve decided, there’s another question you need to ask
Lost sometimes in the discussion of whether to use outsourced services is how. Even after you’ve done your due diligence and chosen a great vendor, you need to stay involved. It can be easy to think, “Vendor XYZ is monitoring our servers or our days in AR, so we should be all set. I can stop worrying at night about our system reliability or our cash flow.” Not true.

You may be outsourcing a component of your technology environment or collections, but you are not outsourcing the accountability for it—from an internal administrative standpoint or (in many cases) from a legal standpoint.

Beware of a false state of confidence
No matter how clear the expectations and rules of engagement with your vendor at the onset of a partnership, circumstances can change—regulatory updates, technology advancements, and old-fashioned vendor neglect. In hiring the vendor, you are accountable for oversight of the partnership. Be actively engaged in the ongoing execution of the services. Also, periodically revisit the contract, make sure the vendor is following all terms, and confirm (with an outside audit, when appropriate) that you are getting the services you need.

Take, for example, server monitoring, which applies to every organization or company, large or small, with data on a server. When a managed service vendor wants to contract with you to provide monitoring services, the vendor’s salesperson will likely assure you that you need not worry about the stability of your server infrastructure, that the monitoring will catch issues before they occur, and that any issues that do arise will be resolved before the end user is impacted. Ideally, this is true, but you need to confirm.

Here’s how to stay involved with your vendor
Ask lots of questions. There’s never a question too small. Here are samples of how precisely you should drill down:

• What metrics will be monitored, specifically?
• Why do the metrics being monitored matter to our own business objectives?
• What thresholds must be met to notify us or produce an alert?
• What does exceeding a threshold mean to our business?
• Who on our team will be notified if an alert is warranted?
• What corrective action will be taken?

Ask uncomfortable questions
Being willing to ask challenging questions of your vendors, even when you are not an expert, is critical. You may feel uncomfortable but asking vendors to explain something to you in terms you understand is very reasonable. They’re the experts; you’re not expected to already understand every detail or you wouldn’t have needed to hire them. It’s their job to explain it to you. Without asking these questions, you may end up with a fairly generic solution that does produce a service or monitor something, but not necessarily all the things you need.

Ask obvious questions
You don’t want anything to slip by simply because you or the vendor took it for granted. It is common to assume that more is being done by a vendor than actually is. By asking even obvious questions, you can avoid this trap. All too often we conduct an IT assessment and are told that a vendor is providing a service, only to discover that the tasks are not happening as expected.

You are accountable for your whole team—in-house and outsourced members
An outsourced solution is an extension of your team. Taking an active and engaged role in an outsourcing partnership remains consistent with your management responsibilities. At the end of the day, management is responsible for achieving business objectives and mission. Regularly check in to make sure that the vendor stays focused on that same mission.

Good Practices Are Not Enough

When it comes to IT security, more than one CEO running a small organization has told me they have really good people taking care of “all that.” These CEOs choose to believe their people perform good practices. That may be true, but who defines good practices and how they administer them? And when? If “security is everyone’s job,” then nobody is responsible for getting specific things done. Good practices require consistency, and consistency requires structure.

From an audit perspective, a control not written down does not exist. Why? Because it can’t be tested, measured, or validated. An IT Auditor can’t assess controls if they were never defined. Verbal instruction carries by far the most risk. “I told him to do that,” doesn’t pass the smell test in court.

Why Does it Matter?

Because it’s not IT’s job to write policies. Their job is to implement IT decisions made by management. They’re not at the right level to make decisions that impact the entire organization. Why should small organizations concern themselves with developing policies and procedures? Here are two very good reasons:

1. Regulatory Requirements
2. Lawsuits

No matter how small your organization, if you have a corporate network (even cloud-based) and you store credit card transactions, personal health information, client financial information or valuable intellectual property, being aware of state and federal regulatory requirements for protecting that information is vital. It is the responsibility of management to research and develop a management framework for addressing risk.

Lawsuits happen when information is stolen and/or employees are terminated for inappropriate activities. If you have no policies that mandate what is and isn’t acceptable, and what the penalties are for violations, your terminated employee has grounds for a wrongful termination lawsuit: policy should not be written by the IT Department.

If confidential data you are responsible for is stolen and clients sue you, standing up in court and saying “We don’t have any written policies or procedures,” is a sure way to have both significant financial losses and a negative impact on your reputation. For a small organization, that could mean going out of business.

Even if data is stolen from a third-party vendor who stores your data, your organization owns the data and is responsible for ensuring the data is secure with the vendor and meets organizational requirements. Do you have a vendor management policy? If you work with vendors, you need one.

Consider, too, that every organization expects to grow its business. The longer management doesn’t pay attention to policies and procedures, the more difficult it becomes to develop and implement them.

Medium and Large Organizations Need to Pay Attention, too

A policy document provides a framework for defining activities and decision-making by everyone in the organization. A policy contains standards for the organization, and outlines penalties for non-performance. The organization’s management team or board of directors must drive their creation.
Policies also maintain accountability in the eyes of internal and external stakeholders. Even the smallest organization wants their customers and employees to have confidence the organization is protecting important information. By defining the necessary controls for running business operations that address risk and compliance requirements (and reviewing them annually), your management team demonstrates a commitment to good practices.

Procedures are the “How”

Procedures don’t belong in a policy. Departments need to be able to design their own procedures to meet policy requirements and definitions. HR will have procedures for employee privacy and financial information, finance must manage credit card, student, banking or client financial documentation, and IT will need to develop specific technical procedures to document their compliance with policy.

If all those procedures are in a policy, it makes for unwieldy policy documents that management must review and approve. Departments need to change and update their procedures quickly in order to remain effective. For example, a policy may mandate the minimum number of characters in a password, but IT needs to develop the procedures to implement that requirement on many platforms and devices.

What is a “Plan” Used For?

Consider that organizations commonly have a Business Continuity Plan as well as an Incident Response Plan. How is a “plan” different from a policy or procedure?

A plan (for example, an Information Security Plan, or Privacy Plan, etc.) is a collection of related procedures with a specific focus. I have seen these collections called “programs,” but most organizations use “plan” (plus, the Federal government uses that term). The term “program” implies a beginning and an end, as well as tending to be a little too generic (think “School Lunch Program”).

Three Ways Not to Develop Policies, Procedures and Plans

Consider the Unique Aspects of Your Organization

What electronic information does your organization consider valuable? During an assessment with a state university, we discovered that the farm research the agriculture school was performing was extremely valuable. While we started out with questions about student health and financial information, the university realized the research data was equally critical. The information might not have federal or state regulations attached to it, but if it is valuable to your organization, you need to protect it. By not taking a one-size fits all approach to our assessment, we were able to meet their specific needs.

Multiple Departments or Locations? Standardize.

Whether your organization is a university, non-profit organization, government agency, medical center or business, you frequently have sub-entities. Each sub-entity or location may have different terms for different functions. For example, at a recent engagement for another university, Information Security “Programs,” “Plans” and “Policies” meant different things on different campuses. This caused confusion on the part of all stakeholders. It also showed a lack of cohesion in the approach to security of the university as a whole. Standardizing language is one of the best ways to have everyone in the organization on the same page, even if the documents are unique to a location, agency or site. This makes planning, implementation, and system upgrade projects run more effectively.

Demonstrate Competence

No matter what terms your organization chooses, using consistent terms is a good way to demonstrate a thoughtful approach. Everyone needs to be talking the same language. Having documents that specify management decisions provides assurance to internal and external stakeholders. Good policies, procedures and plans can mean the difference between a manageable crisis and a business failure.

To receive IT security updates, please sign up here.

A penalty letter doesn’t mean the IRS is correct, but it’s important you know what to do to avoid paying an erroneous penalty. 

The IRS has sent out penalty letters to businesses, non-profits, and government agencies indicating they are not in compliance with the ACA employer mandate for 2015.

The letters usually take the position that the employer owes a penalty based on information examined by the IRS, unless the employer can prove otherwise. This puts employers on the defensive, often based on incorrect facts.

Letters we’ve reviewed all assessed significant penalties against the employers. In two of the cases, penalties were more than $500,000. In these cases it appears that companies incorrectly stated that they didn’t offer health insurance coverage to at least 70% of full-time employees. Given the potential penalties involved, you cannot risk a sub-standard response to the IRS.

Because the process is new and there are many unknowns, including IRS errors in processing and interpretation of the forms, be prepared. If your company receives a penalty letter, here’s what we recommend to get you on the right track for working through the process:

1. Find and review your original 2015 Forms 1094-C and 1095-C that you or your payroll company submitted to the IRS.
2. Determine when you must respond to the IRS. You have 30 days from the date on the penalty notice letter to file a response.
3. The employer penalties and how to address them are a tax matter. Get qualified tax advice from an outside expert who understands both tax and the ACA. Fortunately, we meet those criteria and would be delighted to help you. 

Even if you don’t receive one of the first penalty notices, it’s wise to keep abreast of the ACA issues.

Questions?
Contact Bill Enck for more information.

Most of us have been (or should have been) instructed to avoid using clichés in our writing. These overstated phrases and expressions add little value, and often only increase sentence length. We should also avoid clichés in our thinking, for what we think can often influence how we act.

Consider, for example, “death by committee.” This cliché has greatly — and negatively — skewed views on the benefits of committees in managing projects. Sure, sometimes committee members have difficulty agreeing with one another, which can lead to delays and other issues. In most cases, though, an individual can’t possibly oversee all aspects of a project, or represent all interests in an organization. Committees are vital for project success — and arguably the most important project committee is the steering committee.

What Exactly is a Steering Committee?
It is a group of high-level stakeholders that provides strategic direction for a project, and supports the project manager. Ideally, the group increases the chances for project success by closely aligning project goals to organizational goals. However, it is important to point out that the group’s top priority is project success.

The committee should represent the different departments and agencies affected by the project, but remain relatively small in size, chaired by someone who is not an executive sponsor of the project (in order to avoid conflicts of interest). While the project manager should serve on the steering committee, they should not participate in decision-making; the project manager’s role is to update members on the project’s progress, areas of concern, current issues, and options for addressing these issues.

Overall, the main responsibilities of a steering committee include:

1. Approving the Project Charter
2. Resolving conflicts between stakeholder groups
3. Monitoring project progress against the project management plan
4. Fostering positive communicating about the project within the organization
5. Addressing external threats and issues emerging outside of the project that could impact it
6. Reviewing and approving changes made to the project resource plan, scope, schedules, cost estimates, etc.

What Are the Pros and Cons of Utilizing a Steering Committee?
A group of executive stakeholders providing strategic direction should benefit any project. Because steering committee members are organizational decision-makers, they have the access and credibility to address tough issues that can put the project at a risk, and have the best opportunities to negotiate positive outcomes. In addition, steering committees can engage executive management, and make sure the project meshes with executive management’s vision, mission, and long-range strategic plan. Steering committees can empower project managers, and ensure that all departments and agencies are on the same page in regards to project status, goals, and expectations. In a 2009 article in Project Management Journal, authors Thomas G. Lechler and Martin Cohen concluded that steering committees are important to implementing and maintaining project management standards on an operational level — not only do steering committees directly support project success, they are instrumental in deriving value from an organization's investments in its project management system.

A steering committee is only as effective as it’s allowed to be. A poorly structured steering committee that lacks formal authority, clear roles, and clear responsibilities can impede the success of a project by being slow to respond to project issues. A proactive project manager can help the organization avoid this major pitfall by helping develop project documents, such as the governance document or project plan that clearly define the steering committee structure, roles, responsibilities and authority.

Steer Toward Success!
Steering committees can benefit your organization and its major projects. Yet understanding the roles and responsibilities — and pros and cons — is only a preliminary step in creating a steering committee. Need some advice on how to organize a steering committee? Want to learn more about steering committee best practices? Together, we can steer your project toward success.

A year ago, CMS released the Medicaid Enterprise Certification Toolkit (MECT) 2.1: a new Medicaid Management Information Systems (MMIS) Certification approach that aligns milestone reviews with the systems development life cycle (SDLC) to provide feedback at key points throughout design, development, and implementation (DDI).

The MECT (recently updated to version 2.2) incorporates lessons learned from pilot certifications in several states, including the successful West Virginia pilot that BerryDunn supported. MECT updates have a direct impact on E&E systems—an impact that may increase in the near future. Here is what you need to know:         

Then: Initial Release

In February 2017, CMS introduced six Eligibility & Enrollment (E&E) checklists. Five were leveraged from the MECT, while the sixth checklist contained unique E&E system functionality criteria and provided a new E&E SDLC that—like the MECT—depicted three milestone reviews and increased the Independent Verification and Validation (IV&V) vendor’s involvement in the checklists completion process.

Now: Getting Started

Completing the E&E checklists will help states ensure the integrity of their E&E systems and help CMS guide future funding. This exercise is no easy task, particularly when a project is already in progress. Completion of the E&E checklists involves many stakeholders, including:

• The state (likely more than one agency)
• CMS
• IV&V
• Project Management Office (PMO)
• System vendor(s)

As with any new processes, there are challenges with E&E checklists completion. Some early challenges include:

• Completing the E&E checklists with limited state project resources
• Determining applicable criteria for E&E systems, especially for checklists shared with the MMIS
• Identifying and collecting evidence for iterative projects where criteria may not fall cleanly into one milestone review phase
• Completing the E&E checklists with limited state project resources
• Working with the system vendor(s) to produce evidence

What’s Next?

Additionally, working with system vendors may prove tricky for projects that already have contracts with E&E vendors, as E&E systems are not currently subject to certification (unlike the MMIS). This may lead to instances where E&E vendors are not contractually obligated to provide the evidence that would best satisfy CMS criteria. To handle this and other challenges, states should communicate risks and issues to CMS and work together to resolve or mitigate them.

As CMS partners with states to implement the E&E checklists, some questions are expected to be asked. For example, how much information can be leveraged from the MECT, and how much of the checklists completion process must be E&E-specific? Might certification be required in the near future for E&E systems?

While there will be more to learn and challenges to overcome, the first states completing the E&E checklists have an opportunity to lead the way on working with CMS to successfully build and implement E&E systems that benefit all stakeholders.

On July 31, 2017, CMS released the MECT 2.2 as an update to the MECT 2.1.1. As the recent changes continue to be analyzed, what will the impact be to current and future MMIS and E&E projects?

Check back here at BerryDunn Briefings in the coming weeks and we will help you sort it out.

Four steps to take if you get an ACA Tax Penalty Notice from the IRS
It’s been almost a year since the IRS filing deadline for 2015 Forms 1094-C and 1095-C. Most expected the IRS to issue employer penalty notices related to the 2015 calendar year in late 2016. To date, the IRS has not issued a single penalty notice. Employers who did not comply with the law are subject to penalty and there is a good chance that the IRS will issue 2015 penalty notices soon. So what do you need to do?

If your company receives an ACA penalty notice, you should follow these steps:

1. Scrutinize the information closely — do not assume the IRS claim is accurate
2. Be ready to refute the IRS’s claim — be sure to gather all of the pertinent facts
3. Do not forego your appeal rights — consult with outside tax experts or your legal team to make sure you understand them
4. Contact a tax specialist for guidance — preferably one with ACA and IRS experience

The fate of the ACA is unknown, but the repeal legislation passed by the House in early May retained the employer mandate penalties for 2015. Thus, there is a good chance that any future repeal legislation will also retain the employer penalties for 2015 — and possibly 2016 and 2017.

The bottom line?
Don’t panic, be prepared, and get outside help if you need it. If you need specific information or help with your penalty notice, please contact our ACA consultant Bill Enck.

We humans have a complex attitude toward change. In one sense, we like finding it. For instance: “Now I can buy something from the vending machine!” In reality, we try to avoid change as much as possible. Why? Because it’s frightening. Consider this quote from Mary Shelley’s Frankenstein: “Nothing is so painful to the human mind as a great and sudden change.”

The key word in that quote is “sudden.” Because the more we prepare for change, the less painful it becomes. One crucial way to prepare for change is to assess how ready we are for something new.

Which brings us to you. The fact you are reading a blog post with the words “Readiness for Enterprise Systems” in its title suggests that you have considered, or are considering, changing your institution’s Enterprise Resource Planning (ERP) system or other enterprise software, such as LMS, SIS, CRM, etc. This change is no minor adjustment.

Enterprise systems are complex, impacting institutional activities at many levels, from managing student records, finances, and human resources, to enabling student enrollment and registration. Is your institution prepared for transformation across the organization? To find out, assess your institution’s readiness for change. To help illustrate what an assessment might entail, I’ll outline BerryDunn’s method.

Step #1: Understanding Key Indicators for Readiness
When assisting a client to determine readiness, BerryDunn begins engaging stakeholders from across the institution (e.g., staff, faculty, and students) to understand the current environment. This allows us to address seven key indicators for change readiness:

1. Stakeholder Buy-In. The key to success in changing an ERP platform is for users to understand the value that the change will bring. “Do stakeholders know how the new system will benefit them? Or, from their perspective, ‘What’s in it for me (aka, WIIFM)?’”
2. Executive Sponsorship. In order to obtain stakeholder buy-in, leaders have to communicate effectively with various parties about change. They will be required to display strong and consistent leadership when stakeholders are faced with challenges with vendors, timing, scope creep, or other issues. “Are leaders prepared to lead the charge? Are they committed to change?”
    
3. Vendor Ability. Each institution has specific operational needs and programmatic objectives. ERP vendors will highlight their strengths and may de-emphasize weaknesses that may exist in their products. “Are vendors actually able to meet the institution’s functional needs and align their software with strategic objectives?”
    
4. Business Process Redesign. As mentioned above, it can be a struggle to align operational needs and programmatic objectives with vendor software. It’s even harder to achieve this while ensuring that, in implementing a new ERP system, an institution won’t lose valuable functionality that had been provided by the previous ERP. “Does the client fully understand the impact of a new ERP system on their processes?”
    
5. Project Management. Proactive project management is critical when changing an ERP system. Project managers need to engage institutional stakeholders, project sponsors, and vendors to keep them apprised of progress. “Are project managers empowered to maintain strong communication with all stakeholders?”
    
6. Data Governance. Another key indicator of ERP readiness is how well-defined data management is before implementation. ERP replacement projects are jeopardized when institutions don’t understand their data assets, or don’t know what level of data migration is necessary. “Is the institution prepared for data migration?”
    
7. Software Change Management. As ERP vendors move their products to the cloud, the software they sell will become less customizable, but more configurable. In other words, customers won’t necessarily be able to modify the base software code, but they will have more options in regards to defined fields, workflow, and user interface. Although this sounds limiting, it is actually an opportunity to streamline operations, add discipline to software update timelines, and require organizations to consider how to best complete their administrative functions. It is critical that an institution adapt its software change management practices to meet this reality. “Do the institution’s software change management practices reflect how software is delivered by vendors today?”

Step #2: Establish Agreed-Upon Metrics
Based on our analysis from Step #1, we then score these indicators of readiness based on a maturity scale from 0 – 5, using the following parameters:

Step #3: Score the Readiness of Your Organization
When you work with a consulting firm to assess your institution’s readiness for change, you should expect tangible takeaways that will inform stakeholders and provide a baseline metric. For example, we prepare a brief report that outlines a score for each of the seven maturity indicators of ERP readiness and provides supporting information for the basis of each score.

Here is an example of a Software Change Management section from a hypothetical ERP Readiness Report:

Finally, based on the weighted aggregate score of the report, BerryDunn determines the institution’s readiness for change, and provides recommendations on how to remediate low scores, and sustain higher scores.

Now for the good news. By setting a baseline early in your readiness planning, the scoring can be revisited over time to measure progress and provide project leadership with a simple, but effective, approach to tracking change management within the organization.

Next Steps
As you can see, implementing a new ERP doesn’t have to be a monstrous experience. You simply need to determine your ERP readiness, and follow a common-sense plan for change management. If you’d like to talk more about this process, send me an email: dhoule@berrydunn.com. I look forward to learning about the great changes your institution has planned.