Skip to Main Content

insightsarticles

Medicaid Disproportionate Share Hospital (DSH) audits: 10 tips for a successful audit

09.19.22

Read this if you are subject to Medicaid DSH audits.

The Medicaid DSH program, created in 1981, provides funding to hospitals in the form of DSH payments. Federal law requires that state Medicaid programs make DSH payments to hospitals that serve a disproportionately high number of Medicaid beneficiaries and uninsured low-income patients, to help offset uncompensated care costs (UCC). With healthcare costs steadily outpacing income growth and inflation, these DSH payments serve as an important and sometimes necessary reimbursement mechanism. 

In most states, hospitals that receive Medicaid DSH payments are subject to an annual DSH audit, to determine the DSH UCC limit and to compare it against DSH payments received from the Medicaid state agencies. The DSH UCC limit uses information from the Medicare cost report, as well as Medicaid and uninsured patient detail, to calculate the UCC. 

Upon completion of the DSH audit, the Medicaid state agency or its contractor will compare the UCC to the DSH payments issued during the state fiscal year to determine if a hospital is in a shortfall, where DSH payments were less than the UCC, or a "longfall", where DSH payments were greater than the UCC. If it is determined that a hospital is in a longfall, the state’s Medicaid plan may require hospitals to pay some or all of the DSH funds back. With potentially significant financial implications, it is in the hospital’s best interest to understand the requirements and to complete the audit in a timely and accurate fashion. 

Completion of the DSH audit can be a daunting task. For some, the mere mention of the words “DSH audit” is enough to send chills down one’s spine. It is best assigned to those with solid reimbursement, revenue cycle, hospital operations, and information management system (IT) knowledge. 

It is not uncommon for hospitals to have a consulting firm, such as BerryDunn, complete the DSH audit on their behalf. While the DSH audit may seem like a heavy lift, we hope the following tips will assist you in tackling the audit and getting through the process smoothly and efficiently. 

  1. Allow enough time for completion of the DSH audit. A considerable amount of time and effort is needed to collect, reconcile and summarize the internal claims data and to enter information into the required schedules. The time needed to complete the audit will depend on your organization’s available resources and complexity of the IT and financial systems. Typically, this process takes one to two weeks to complete, sometimes longer. Creating the patient data support files themselves is arguably the most time-consuming aspect of the process. 
  2. Review the minimum federal requirements for DSH payment eligibility and document your organization’s qualifications. To receive DSH payments, hospitals must have a low-income inpatient utilization rate (LIUR) greater than 25 percent, or the hospital must have a Medicaid utilization rate (MIUR) that is at least one standard deviation above the mean rate of all hospitals in the state that receive Medicaid payments. States may distribute DSH payments to other hospitals provided they have a MIUR of at least one percent, and if they offer obstetric services that they have at least two OB/GYN on staff.
  3. Take time to understand how DSH payments are calculated in your state and if any recent state Medicaid plan changes may affect your organization’s eligibility and amount of qualifying payments. 
  4. Carefully review any audit instructions provided, paying particular attention to types of claims, service dates, and required supporting information. 
  5. Gather all the data files needed for completion of the DSH audit before diving in, including the cost report(s) for the period under audit, patient data support files that support the Medicaid and uninsured populations, and audited hospital financial statements (if applicable). Remember: bad data in, bad data out!
  6. Reconcile the state claims data. If the state claims data is used by the state Medicaid agency or its contractor to complete a portion of the audit, we strongly recommend a reconciliation of the state claims data to internal records, to help ensure all eligible claims, inpatient days, and charges are included.
  7. Identify and capture all Medicaid and uninsured patients. When completing schedules, hospitals should ensure they are identifying and capturing all Medicaid and uninsured patients, and accurately report the charges and payments for these patients for the DSH audit. Certain data elements are required, including patient demographic data and hospital charge and payment information. 
  8. Review insured patients' claims with no insurance payment. For uninsured patient charge capture, hospitals may benefit from reviewing insured patients’ claims with no insurance payment. Some claims, meeting state Medicaid plan coverage requirements, could be included as “uninsured” if they meet one of the three exclusion requirements: (1) service was not covered by insurance, but is covered by a Medicaid state plan; (2) patient’s benefits were exhausted prior to the admission/service date, and (3) patient reached the lifetime insurance limit. Some accounts that appear to be insured on the surface may in fact be eligible for inclusion in the calculation of the UCC. Remember, claims denied by insurance, such as untimely filing, lack of pre-authorization, or medically unnecessary services, should not be reported. In many cases, the only way to know for sure if an account can be included is through research of patient notes and financial information. Leave no stone unturned! It could be the difference between a longfall and a shortfall in your UCC.
  9. Review your work prior to submission. Many states will provide a checklist with the audit package, to ensure all data elements have been included with the submission. Even if the hospital has resources to complete the audit, consider arranging for a third-party review of the DSH audit and other submission items to help ensure the accuracy and completeness of the data. 
  10. Schedule time to review audit adjustments. The Medicaid state agency or its contractor will likely provide an adjustment report for your review. Plan your time for review of the audit adjustments, as the window for response or amendments may be very narrow. Take note of the adjustments, especially the high dollar ones, and either confirm that they are accurate or make revisions as necessary. This is another opportunity to bring in an advisor for a second review. 

Should you have any questions about or during the DSH reporting process, please do not hesitate to reach out to Andrew Berube and Olga Gross-Balzano at BerryDunn. We’d be pleased to serve as a second set of eyes to your process or alleviate the time requirements on your finance team. 

Andrew Berube
aberube@berrydunn.com
207-239-9893

Olga Gross-Balzano
OGross-Balzano@berrydunn.com
207-842-8025

Related Industries

Related Professionals

Principals

BerryDunn experts and consultants

Follow these six steps to help your senior living organization improve cash flow, decrease days in accounts receivable, and reduce write offs.

From regulatory and reimbursement rule changes to new software and staff turnover, senior living facilities deal with a variety of issues that can result in eroding margins. Monitoring days in accounts receivable and creeping increases in bad debt should be part of a regular review of your facility’s financial indicators.

Here are six steps you and your organization can take to make your review more efficient and potentially improve your bottom line:

Step 1: Understand your facility’s current payer mix.

Understanding your payer mix and various billing requirements and reimbursement schedules will help you set reasonable goals and make an accurate cash flow forecast. For example, government payers often have a two-week reimbursement turn-around for a clean claim, while commercial insurance reimbursement may take up to 90 days. Discovering what actions you can take to keep the payment process as short as possible can lessen your average days in accounts receivable and improve cash flow.

Step 2: Gain clarity on your facility’s billing calendar.

Using data from Step 1, review (or develop) your team’s billing calendar. The faster you send a complete and accurate bill, the sooner you will receive payment.

Have a candid discussion with your billers and work on removing (or at least reducing) existing or perceived barriers to producing timely and accurate bills. Facilities frequently find opportunities for cash flow optimization by communicating their expectations for vendors and care partners. For example, some facilities rely on their vendors to provide billing logs for therapy and ancillary services in order to finalize Resource Utilization Groups (RUGs) and bill Medicare and advantage plans. Delayed medical supply and pharmacy invoices frequently hold up private pay billing. Working with vendors to shorten turnaround time is critical to receiving faster payments.

Interdependencies and areas outside the billers’ control can also negatively influence revenue cycle and contribute to payment delays. Nursing and therapy department schedules, documentation, and the clinical team’s understanding of the principles of reimbursement all play significant roles in timeliness and accuracy of Minimum Data Sets (MDSs) — a key component of Medicare and Medicaid billing. Review these interdependencies for internal holdups and shorten time to get claims produced.

Step 3: Review billing practices.

Observe your staff and monitor the billing logs and insurance claim acceptance reports to locate and review rejected invoices. Since rejected claims are not accepted into the insurer’s system, they will never be reflected as denied on remittance advice documents. Review of submitted claims for rejections is also important as frequently billing software marks claims as billed after a claim is generated. Instruct billers to review rejections immediately after submitting the bill, so rework, resubmission, and payment are timely.

Encourage your billers to generate pull communications (using available reporting tools on insurance portals) to review claim status and resolve any unpaid or suspended claims. This is usually a quicker process than waiting for a push communication (remittance advice) to identify unpaid claims.

Step 4: Review how your facility receives payments.

Challenge any delays in depositing money. Many insurance companies offer payment via ACH transfer. Discuss remote check deposit solutions with your financial institution to eliminate delays. If the facility acts as a representative payee for residents, make sure social security checks are directly deposited to the appropriate account. If you use a separate non-operating account to receive residents’ pensions, consider same day bill pay transfer to the operating account.

Step 5: Review industry benchmarks.

This is critical to understanding where your facility stands and seeing where you can make improvements. BerryDunn’s database of SNF Medicare cost reports filed for FY 2015 - 2018 shows:

Skilled Nursing Facilities: Days in Accounts Receivable

Step 6: Celebrate successes!

Clearly some facilities are doing it very well, while some need to take corrective action. This information can also help you set reasonable goals overall (see Step 1) as well as payer-specific reimbursement goals that make sense for your facility. Review them with the revenue cycle team and question any significant variances; challenge staff to both identify reasons for variances and propose remedial action. Helping your staff see the big picture and understanding how they play a role in achieving department and company goals are critical to sustaining lasting change AND constant improvement.

Change, even if it brings intrinsic rewards (like decreased days in accounts receivable, increased margin to facilitate growth), can be difficult. Acknowledge that changing processes can be tough and people may have to do things differently or learn new skills to meet the facility’s goal. By celebrating the improvements — even little ones — like putting new processes in place, you encourage and engage people to take ownership of the process. Celebrating the wins helps create advocates and lets your team know you appreciate their work. 

To learn more, contact one of our revenue cycle specialists.

Article
Six steps to gain speed on collections

Cost increases and labor issues have contributed to the rise of outsourcing as an option for senior living and health care providers.  While outsourcing of all types is a growing trend — from the C-suite to food service, it is a decision that should be considered carefully, as lack of planning could result in significant long-lasting financial, public relations and personnel losses. Let’s examine the outsourcing of billing services and collections.

If you are concerned with efficiencies and focusing on your core business needs — nursing care and rehabilitation — then your facility owners and management may have or are currently considering outsourcing one or both end stages of the revenue cycle.

There are some compelling reasons to outsource.

When choosing to outsource, your facility can reduce or even eliminate the challenge of keeping up with increasing complexities of medical billing, staff development and retraining, software costs, and workforce challenges. Smaller facilities can mitigate billing office resource shortages caused by staff vacations, medical leaves and turnover via outsourcing portions of their revenue cycle processes.

Because of a variety of software options, extensive coding and evolving reimbursement policies, professional billing and collection companies may be more efficient, delivering a stronger cash flow by reducing the rate of denied or rejected claims and assuring accurate coding. As facilities normally pay either a “per claim” fee or a percentage of their patient service revenue for this service, the facility’s cost fluctuates with changes in census or payer mix. Facilities may serve their customers better by decreasing insurance denials and reducing balance transfers to patients.

Outsourcing may help organizations to focus on their core business: senior living services.

Your facility should assess your organization’s readiness, fit and contract limitations prior to outsourcing. Here are some things to consider.

1. Be accountable. It is your facility’s ultimate responsibility to comply with all applicable rules and regulations, including HIPAA. And while signing a business associate agreement is a step in right direction, it may not guarantee peace of mind.

  • Ask a potential vendor about data transmission, storage, sharing, access and destruction policies, as well as processes designed to monitor compliance. Question any recent breaches or unauthorized access incidents — how were they handled? As HIPAA non-compliance and unauthorized access to protected health information (PHI) may result in financial penalties and bad publicity, you should evaluate the need to consult with an expert.
  • Ensure the vendor knows your state’s facility licensing regulations. For example, some states prohibit charging patients or residents any collection fees. Some states or payers require refunds for any overpayments to within certain defined periods. A good vendor will meet your state’s regulations. Ask to review their standard collection forms and collection procedures and protect your organization from unexpected non-compliance tags. 

2. Communicate. Discuss what information they require, when, in what format, and how they will make corrections. In-house billing staff can normally access a resident’s medical file, whether electronic or paper, or inquire with the facility operations team regarding a particular claim. This is not the case with an external vendor. 

  • To outsource effectively, you need to designate an in-house position to respond to missing information requests promptly. Facilities operating on web-based medical records software should evaluate the risks of granting a billing vendor even limited access to residents’ electronic medical files.
  • Review contract terms for any up charges assessed by the vendor if your facility can’t respond to information requests in a timely fashion. 

3. Understand and agree upon the scope of the contract. Contract scope misunderstanding can have long-lasting financial implications for the facility, and result in increased bad debt. Your management team should compile a list of assumptions and agreement terms not stated clearly in the contract, and address them in a meeting before accepting the terms. At a minimum, get answers to these questions:

  • Is the vendor submitting bills for all types of payers, levels of care and billing forms, including private, private long-term care insurance, adult day and outpatient, or only certain electronic claims?
  • Is the vendor responsible for notifying your organization of any delays with claim processing, payer requests for supporting medical records and any other identified administrative requests and rejections? If so, how fast and in what format?
  • Is the vendor responsible for assisting with regulatory compliance reporting, such as required data for a cost report preparation, audit, etc.?
  • What minimum quality assurance steps does the vendor apply when generating and processing claims, and how do they remedy identified issues?
  • Is the vendor only submitting bills or are they also working on collections?
  • Is the facility or a vendor responding to resident requests for additional information or questions about the billing statements?

4. Maintain alignment with the organization’s philosophy and vision. As with any other area of operations you consider outsourcing, outsourcing billing and collections requires careful examination of its impact on customer service and community relations. If a vendor produces co-pay and private pay invoices or statements, will you have control over the format and presentation of these mailings? If a vendor is engaged to perform collections follow up, your management team needs to understand collections procedures and methods used and ensure they are a good fit with your mission.

5. Set goals and benchmarks. Your management should analyze days in accounts receivable, accounts receivable aging trends, and cash as a percent of net revenue monthly, and then meet with the vendor promptly to understand the causes of any undesired trends and work on remedial plan. 

6. Understand your organization’s reasons for outsourcing. If your facility struggles with completing resident pre-admission screening, obtaining prior authorizations, or staying on top of Medicaid applications and recertifications — stop. Outsourcing is very unlikely to remedy these situations and could even make them worse. We recommend seeking the assistance of an experienced revenue cycle or process improvement consultant before outsourcing any portion of the billing and collections process.

The BerryDunn Senior Living team welcomes your feedback, and is always one phone call or email away, should your organization need to take a deeper look at revenue cycle and process improvement opportunities.

Article
Can outsourcing increase revenues and reduce cycle time? Yes, if it's the right fit

In a previous blog post, “Six Steps to Gain Speed on Collections”, we discussed the importance of regular reviews of long-term care facility financial performance indicators and benchmarks, and suggestions to speed up collections. We also noted that knowledge of your facility’s current payer mix is critical to understanding days in accounts receivable (A/R).

The purpose of a regular A/R review is to facilitate prompt and complete collections by identifying trends and potential system issues and then implementing an action plan. Additionally, an A/R review is used to report on certain regulatory compliance requirements, and could help management identify staff training and development needs. Here are some tips on how to make your review both effective and efficient.

  • Practice professional skepticism. Generate your own A/R reports. While your staff may be competent and trustworthy, it is a good habit to get information directly from your billing system.
     
  • Understand your revenue cycle calendar. A common approach is to generate A/R reports at the end of each month. While you can generate reports at any time, always ask your staff whether all recent cash receipts and adjustments have been posted.
     
  • Know your software. Billing software usually has a few pre-set A/R reports available, and you can customize some of them to simplify your review and analysis. Consult with your IT department or software vendor to gain a better understanding of available report types, parameters, options and limitations. Three frequently-used reports are:

    A/R Transaction Report: This report shows selected transaction details (date, payer, account, transaction type) and can help you understand changes in those parameters. Start with a “summary by type” then drill down to further detail if needed. Run and review this report monthly to identify any unexpected write-offs or adjustments in the prior period.

    A/R Aging Report: This report breaks A/R data into aging buckets (current, 30, 60, 90, etc.). It is used to fine-tune collection efforts and evaluate a bad debt allowance (as older balances are less likely to be collected). Using a higher number of buckets will provide more detailed information, and replacing “age” of accounts with a “month” label will make it easier to see trends in month-to-month changes. Your facility’s payer mix will determine a reasonable “Days in A/R” benchmark. Generally, you should see the most dramatic drop in open accounts within 30 days for Medicare, Medicaid and private payers; and within 60-90 days for other payers. Focus your staff’s attention on balances nearing 300 days, as many insurers have a claim filing limit of one year from the service date. Develop an action plan to follow up within two to three weeks.

    Unbilled Claims Report: This report shows un-submitted claims. Discuss unbilled claims with your staff, understand why they are unbilled to reduce the number of un-submitted claims, and develop an action plan for submission to responsible parties.
     
  • Understand available report formats. Billing software usually offers the option to run reports in different file formats (web, PDF, Excel, etc.). Know your options and select the one you are most comfortable with. We recommend Excel for easy data analysis and trending.
     
  • Segment, segment, segment — and look for trends! Data segmentation and filtering is the best approach to effective and efficient A/R review. At a minimum, you should be separating Medicare A, Medicare B, Medicare Advantage, Medicaid, private pay, pending/presumed Medicaid and any other payers with a particularly high volume of claims. The differences in timing of billing, complexity, compliance requirements, benchmarking and submission of claim methods warrant a separate, more-detailed review of claims. Here are some examples of what to look for.

    Medicare: An open claim will hold payments for all following claims within that stay. Instruct your billing team to ensure claim submission, and review any rejected or suspended claims. Carefully analyze any Medicare credits. Small credit and debit balances may indicate errors in the rate-setting module of your software. Review for rate changes, contractual adjustments and sequestration set up. Review any credit balances over $25 for potential overpayment. These credits have to be corrected in that quarter or listed on your quarterly credit balance report to Medicare. Balances of $160 or more may indicate incorrectly calculated co-pay days, while balances over $200 may indicate billing for an incorrect number of days. Medicare has a one-year limit on submitting claims so act promptly to resolve any balances over 300 days.

    Medicaid: Open balances may indicate eligibility gaps, changes in coverage levels, rate set-up errors or incorrect classification as primary or secondary payer. This payer also has a one-year limit on submitting claims. Again, act promptly to resolve any balances over 300 days.

    Pending/Presumed Medicaid: Medicaid application processing times vary by state. Normally eligibility is determined within a few months at the most. Open claims older than 120 days should be investigated promptly.
     
  • Filter data for the highest and lowest balances. Focus on your five to ten highest balances and work with staff to resolve. Discuss reasons for any credit balances with staff, as regulations often require a prompt refund or claim adjustment. Credit balances could also indicate incorrectly posted payments (to the wrong patient account or service date). Instruct staff to routinely review and resolve credits to prevent collection activities on paid-off accounts. 

Ask questions, follow up and recognize good work. If you notice an improvement in your facility’s A/R report, make sure you recognize team and individual efforts. If improvements are slow to come, discuss obstacles with staff, refine your A/R reporting, and review the plan as needed.

Article
Segmenting accounts receivable reports: How to use your reports to understand where you are

Do you know what would happen to your company if your CEO suddenly had to resign immediately for personal reasons? Or got seriously ill? Or worse, died? These scenarios, while rare, do happen, and many companies are not prepared. In fact, 45% of US companies do not have a contingency plan for CEO succession, according to a 2020 Harvard Business Review study.  

Do you have a plan for CEO succession? As a business owner, you may have an exit strategy in place for your company, but do you have a plan to bridge the leadership gap for you and each member of your leadership team? Does the plan include the kind of crises listed above? What would you do if your next-in-line left suddenly? 

Whether yours is a family-owned business, a company of equity partners, or a private company with a governing body, here are things to consider when you’re faced with a situation where your CEO has abruptly departed or has decided to step down.  

1. Get a plan in place. First, assess the situation and figure out your priorities. If there is already a plan for these types of circumstances, evaluate how much of it is applicable to this particular circumstance. For example, if the plan is for the stepping down or announced retirement of your CEO, but some other catastrophic event occurs, you may need to adjust key components and focus on immediate messaging rather than future positioning. If there is no plan, assign a small team to create one immediately. 

Make sure management, team leaders, and employees are aware and informed of your progress; this will help keep you organized and streamline communications. Management needs to take the lead and select a point person to document the process. Management also needs to take the lead in demeanor. Model your actions so employees can see the situation is being handled with care. Once a strategy is identified based on your priorities, draft a plan that includes what happens now, in the immediate future, and beyond. Include timetables so people know when decisions will be made.  

2. Communicate clearly, and often. In times of uncertainty, your employees will need as much specific information as you can give them. Knowing when they will hear from you, even if it is “we have nothing new to report” builds trust and keeps them vested and involved. By letting them know what your plan is, when they’ll receive another update, what to tell clients, and even what specifics you can give them (e.g., who will take over which CEO responsibility and for how long), you make them feel that they are important stakeholders, and not just bystanders. Stakeholders are more likely to be strong supporters during and after any transition that needs to take place. 

3. Pull in professional help. Depending on your resources, we recommend bringing in a professional to help you handle the situation at hand. At the very least, call in an objective opinion. You’ll need someone who can help you make decisions when emotions are running high. Bringing someone on board that can help you decipher what you have to work with and what your legal and other obligations may be, help rally your team, deal with the media, and manage emotions can be invaluable during a challenging time. Even if it’s temporary. 

4. Develop a timeline. Figure out how much time you have for the transition. For example, if your CEO is ill and will be stepping down in six months, you have time to update any existing exit strategy or succession plan you have in place. Things to include in the timeline: 

  • Who is taking over what responsibilities? 
  • How and what will be communicated to your company and stakeholders? 
  • How and what will be communicated to the market? 
  • How will you bring in the CEO's replacement, while helping the current CEO transition out of the organization? 

If you are in a crisis situation (e.g., your CEO has been suddenly forced out or asked to leave without a public explanation), you won’t have the luxury of time.  

Find out what other arrangements have been made in the past and update them as needed. Work with your PR firm to help with your change management and do the right things for all involved to salvage the company’s reputation. When handled correctly, crises don’t have to have a lasting negative impact on your business.   

5. Manage change effectively. When you’re under the gun to quickly make significant changes at the top, you need to understand how the changes may affect various parts of your company. While instinct may tell you to focus externally, don’t neglect your employees. Be as transparent as you possibly can be, present an action plan, ask for support, and get them involved in keeping the environment positive. Whether you bring in professionals or not, make sure you allow for questions, feedback, and even discord if challenging information is being revealed.  

6. Handle the media. Crisis rule #1 is making it clear who can, and who cannot, speak to the media. Assign a point person for all external inquiries and instruct employees to refer all reporter requests for comment to that point person. You absolutely do not want employees leaking sensitive information to the media. 
 
With your employees on board with the change management action plan, you can now focus on external communications and how you will present what is happening to the media. This is not completely under your control. Technology and social media changed the game in terms of speed and access to information to the public and transparency when it comes to corporate leadership. Present a message to the media quickly that coincides with your values as a company. If you are dealing with a scandal where public trust is involved and your CEO is stepping down, handling this effectively will take tact and most likely a team of professionals to help. 

Exit strategies are planning tools. Uncontrollable events occur and we don’t always get to follow our plan as we would have liked. Your organization can still be prepared and know what to do in an emergency situation or sudden crisis.  Executives move out of their roles every day, but how companies respond to these changes is reflective of the strategy in place to handle unexpected situations. Be as prepared as possible. Own your challenges. Stay accountable. 

BerryDunn can help whether you need extra assistance in your office during peak times or interim leadership support during periods of transition. We offer the expertise of a fully staffed accounting department for short-term assignments or long-term engagements―so you can focus on your business. Meet our interim assistance experts.

Article
Crisis averted: Why you need a CEO succession plan today

Read this if your CFO has recently departed, or if you're looking for a replacement.

With the post-Covid labor shortage, “the Great Resignation,” an aging workforce, and ongoing staffing concerns, almost every industry is facing challenges in hiring talented staff. To address these challenges, many organizations are hiring temporary or interim help—even for C-suite positions such as Chief Financial Officers (CFOs).

You may be thinking, “The CFO is a key business partner in advising and collaborating with the CEO and developing a long-term strategy for the organization; why would I hire a contractor to fill this most-important role?” Hiring an interim CFO may be a good option to consider in certain circumstances. Here are three situations where temporary help might be the best solution for your organization.

Your organization has grown

If your company has grown since you created your finance department, or your controller isn’t ready or suited for a promotion, bringing on an interim CFO can be a natural next step in your company’s evolution, without having to make a long-term commitment. It can allow you to take the time and fully understand what you need from the role — and what kind of person is the best fit for your company’s future.

BerryDunn's Kathy Parker, leader of the Boston-based Outsourced Accounting group, has worked with many companies to help them through periods of transition. "As companies grow, many need team members at various skill levels, which requires more money to pay for multiple full-time roles," she shared. "Obtaining interim CFO services allows a company to access different skill levels while paying a fraction of the cost. As the company grows, they can always scale its resources; the beauty of this model is the flexibility."

If your company is looking for greater financial skill or advice to expand into a new market, or turn around an underperforming division, you may want to bring on an outsourced CFO with a specific set of objectives and timeline in mind. You can bring someone on board to develop growth strategies, make course corrections, bring in new financing, and update operational processes, without necessarily needing to keep those skills in the organization once they finish their assignment. Your company benefits from this very specific skill set without the expense of having a talented but expensive resource on your permanent payroll.

Your CFO has resigned

The best-laid succession plans often go astray. If that’s the case when your CFO departs, your organization may need to outsource the CFO function to fill the gap. When your company loses the leader of company-wide financial functions, you may need to find someone who can come in with those skills and get right to work. While they may need guidance and support on specifics to your company, they should be able to adapt quickly and keep financial operations running smoothly. Articulating short-term goals and setting deadlines for naming a new CFO can help lay the foundation for a successful engagement.

You don’t have the budget for a full-time CFO

If your company is the right size to have a part-time CFO, outsourcing CFO functions can be less expensive than bringing on a full-time in-house CFO. Depending on your operational and financial rhythms, you may need the CFO role full-time in parts of the year, and not in others. Initially, an interim CFO can bring a new perspective from a professional who is coming in with fresh eyes and experience outside of your company.

After the immediate need or initial crisis passes, you can review your options. Once the temporary CFO’s agreement expires, you can bring someone new in depending on your needs, or keep the contract CFO in place by extending their assignment.

Considerations for hiring an interim CFO

Making the decision between hiring someone full-time or bringing in temporary contract help can be difficult. Although it oversimplifies the decision a bit, a good rule of thumb is: the more strategic the role will be, the more important it is that you have a long-term person in the job. CFOs can have a wide range of duties, including, but not limited to:

  • Financial risk management, including planning and record-keeping
  • Management of compliance and regulatory requirements
  • Creating and monitoring reliable control systems
  • Debt and equity financing
  • Financial reporting to the Board of Directors

If the focus is primarily overseeing the financial functions of the organization and/or developing a skilled finance department, you can rely — at least initially — on a CFO for hire.

Regardless of what you choose to do, your decision will have an impact on the financial health of your organization — from avoiding finance department dissatisfaction or turnover to capitalizing on new market opportunities. Getting outside advice or a more objective view may be an important part of making the right choice for your company.

BerryDunn can help whether you need extra assistance in your office during peak times or interim leadership support during periods of transition. We offer the expertise of a fully staffed accounting department for short-term assignments or long-term engagements―so you can focus on your business. Meet our interim assistance experts.

Article
Three reasons to consider hiring an interim CFO

Editor’s note: Read this if your organization is an entity with significant lease transactions with terms greater than a year.  

Updated: June 2020

The new Accounting Standards Codification Topic 842 (ASC 842) lease accounting standard is actually not that new. The Financial Accounting Standards Board (FASB) first released the standard in 2016 but, due to a series of delays, it hasn’t been required yet. Even with delays, some organizations have already started to implement ASC 842. They include:

  1. Public business entities
  2. Not-for-profits that have issued or are conduit bond obligors for securities traded, listed, or quoted on an exchange or an over the-counter market

All other entities will start implementing for fiscal years starting after December 15, 2021 and internal periods within fiscal years beginning after December 15, 2022 (January 1 for calendar reporting periods).

Here’s a quick rundown of the lease classifications and how they’ll impact your financial statements.  

Classifying leases

Under the new standards, leases fall into one of two classifications: finance leases and operating leases. This classification makes all the difference in how leases are reported in the financial statements. 

Finance lease

A finance lease essentially treats an asset as if it were purchased by the lessee and financed with funds from the lessor. This prevents companies from hiding financial obligations that are basically liabilities. ASC 842 requires leases to be classified as finance leases if they meet any of the following five criteria:

  1. The lease transfers ownership of the underlying asset to the lessee by the end of the lease term.
  2. The lease grants the lessee an option to purchase the underlying asset that the lessee is reasonably certain to exercise.
  3. The lease term is for the major part of the remaining economic life of the underlying asset. However, if the commencement date falls at or near the end of the economic life of the underlying asset, this criterion shall not be used for purposes of classifying the lease.
  4. The present value of the sum of the lease payments and any residual value guaranteed by the lessee that is not already reflected in the lease payments in accordance with paragraph 842-10-30-5(f) equals or exceeds substantially all of the fair value of the underlying asset.
  5. The underlying asset is of such a specialized nature that it is expected to have no alternative use to the lessor at the end of the lease term.

As you can see from the five criteria, finance leases are just purchase arrangements financed over time. ASC 842 is designed to reflect that and improve transparency for investors and other stakeholders.  

Operating lease

Any lease not meeting any of the above criteria is classified as an operating lease. 

No more off-book leases

One of the problems ASC 842 seeks to solve is “off-book” operating leases that show up only as notes on the balance sheet and cloud the debt ratios of companies. Under the new standards, both operating and finance leases will be reported on the balance sheet. The only exceptions are certain leases with terms of 12 months of less. 

Recording finance vs. operating leases

With both operating and finance leases reported on the balance sheet, what’s the difference between the two? The major difference is the way they are recorded on the income statement:

  • Interest and amortization are recorded separately on the income statement for finance leases.
  • Operating leases will report a single line item based on the lease payment. 
  • Principal repayments for finance lease are classified as financing activities.
  • Payments on operating leases are classified as operating activities.

Next Steps 

Make sure you start by implementing for fiscal years starting after December 15, 2021 and internal periods within fiscal years beginning after December 15, 2022. If you have questions about finance or operating leases, or need help with the new standard, please don’t hesitate to contact the team

Download our lease classification infographic for a comparison of finance and operating leases under ASC 842.

Download our Lease Classification Infographic

Article
ASC 842 lease accounting standards: Finance and operating leases

LIBOR is leaving—is your financial institution ready to make the most of it?

In July 2017, the UK’s Financial Conduct Authority announced the phasing out of the London Interbank Offered Rate, commonly known as LIBOR, by the end of 20211. With less than two years to go, US federal regulators are urging financial institutions to start assessing their LIBOR exposure and planning their transition. Here we offer some general impacts of the phasing out, some specific actions your institution can take to prepare, and, finally, background on how we got here (see Background at right).

How will the phase-out impact financial institutions?

The Federal Reserve estimates roughly $200 trillion in LIBOR-indexed notional value transactions in the cash and derivatives market2. LIBOR is used to help price a variety of financial services products,  including $3.4 trillion in business loans and $1.3 trillion in consumer loans, as well as derivatives, swaps, and other credit instruments. Even excluding loans and financial instruments set to mature before 2021—estimated by the FDIC at 82% of the above $200 trillion—LIBOR exposure is still significant3.

A financial institution’s ability to lend money is largely dependent on the relative stability of its capital position, or lack thereof. For institutions with a significant amount of LIBOR-indexed assets and liabilities, that means less certainty in expected future cash flows and a less stable capital position, which could prompt institutions to deny loans they might otherwise have approved. A change in expected cash flows could also have several indirect consequences. Criticized assets, assessed for impairment based on their expected future cash flows, could require a specific reserve due to lower present value of expected future cash flows.

The importance of fallback language in loan agreements

Fallback language in loan agreements plays a pivotal role in financial institutions’ ability to manage their LIBOR-related financial results. Most loan agreements include language that provides guidance for determining an alternate reference rate to “fall back” on in the event the loan’s original reference rate is discontinued. However, if this language is non-existent, contains fallbacks that are no longer adequate, or lacks certain key provisions, it can create unexpected issues when it comes time for financial institutions to reprice their LIBOR loans. Here are some examples:

  • Non-existent or inadequate fallbacks
    According to the Alternative Reference Rates Committee, a group of private-market participants convened by the Federal Reserve to help ensure a successful LIBOR transition, "Most contracts referencing LIBOR do not appear to have envisioned a permanent or indefinite cessation of LIBOR and have fallbacks that would not be economically appropriate"4.

    For instance, industry regulators have warned that without updated fallback language, the discontinuation of LIBOR could prompt some variable-rate loans to become fixed-rate2, causing unanticipated changes in interest rate risk for financial institutions. In a declining rate environment, this may prove beneficial as loans at variable rates become fixed. But in a rising rate environment, the resulting shrink in net interest margins would have a direct and adverse impact on the bottom line.

  • No spread adjustment
    Once LIBOR is discontinued, LIBOR-indexed loans will need to be repriced at a new reference rate, which could be well above or below LIBOR. If loan agreements don’t provide for an adjustment of the spread between LIBOR and the new rate, that could prompt unexpected changes in the financial position of both borrowers and lenders3. Take, for instance, a loan made at the Secured Overnight Financing Rate (SOFR), generally considered the likely replacement for USD LIBOR. Since SOFR tends to be lower than three-month LIBOR, a loan agreement using it that does not allow for a spread adjustment would generate lower loan payments for the borrower, which means less interest income for the lender.

    Not allowing for a spread adjustment on reference rates lower than LIBOR could also cause a change in expected prepayments—say, for instance, if borrowers with fixed-rate loans decide to refinance at adjustable rates—which would impact post-CECL allowance calculations like the weighted-average remaining maturity (WARM) method, which uses estimated prepayments as an input.

What can your financial institution do to prepare?

The Federal Reserve and the SEC have urged financial institutions to immediately evaluate their LIBOR exposure and expedite their transition. Though the FDIC has expressed no intent to examine financial institutions for the status of LIBOR planning or critique loans based on use of LIBOR3, Federal Reserve supervisory teams have been including LIBOR transitions in their regular monitoring of large financial institutions5. The SEC has also encouraged companies to provide investors with robust disclosures regarding their LIBOR transition, which may include a notional value of LIBOR exposure2.

Financial institutions should start by analyzing their LIBOR exposure beyond 2021. If you don’t expect significant exposure, further analysis may be unnecessary. However, if you do expect significant future LIBOR exposure, your institution should conduct stress testing using LIBOR as an isolated variable by running hypothetical transition scenarios and assessing the potential financial impact.

Closely examine and assess fallback language in loan agreements. For existing loan agreements, you may need to make amendments, which could require consent from counterparties2. For new loan agreements maturing beyond 2021, lenders should consider selecting an alternate reference rate. New contract language for financial instruments and residential mortgages is currently being drafted by the International Securities Dealers Association and the Federal Housing Finance Authority, respectively3—both of which may prove helpful in updating loan agreements.

Lenders should also consider their underwriting policies. Loan underwriters will need to adjust the spread on new loans to accurately reflect the price of risk, because volatility and market tendencies of alternate loan reference rates may not mirror LIBOR’s. What’s more, SOFR lacks abundant historical data for use in analyzing volatility and market tendencies, making accurate loan pricing more difficult.

Conclusion: Start assessing your LIBOR risk soon

The cessation of LIBOR brings challenges and opportunities that will require in-depth analysis and making difficult decisions. Financial institutions and consumers should heed the advice of regulators and start assessing their LIBOR risk now. Those that do will not only be better prepared―but also better positioned―to capitalize on the opportunities it presents.

Need help assessing your LIBOR risk and preparing to transition? Contact BerryDunn’s financial services specialists.

1 https://www.washingtonpost.com/business/2017/07/27/acdd411c-72bc-11e7-8c17-533c52b2f014_story.html?utm_term=.856137e72385
2 Thomson Reuters Checkpoint Newsstand April 10, 2019
3 https://www.fdic.gov/regulations/examinations/supervisory/insights/siwin18/si-winter-2018.pdf
4 https://bankingjournal.aba.com/2019/04/libor-transition-panel-recommends-fallback-language-for-key-instruments/
5 https://www.reuters.com/article/us-usa-fed-libor/fed-urges-u-s-financial-industry-to-accelerate-libor-transition-idUSKCN1RM25T

Article
When one loan rate closes, another opens